2005 Bentley R on 2040-cars

Auto blog

2021 Bentley Bentayga V8 First Drive | Not messing with success

The 2021 Bentley Bentayga V8 marks the first refresh for Bentley’s first and rather successful SUV. The company has sold more than 20,000 of them worldwide since its introduction just a few years ago. As such, Bentley didnÂ’t need to do much to keep it updated, nor did it. The refresh boils down to exterior and interior updates, and after spending some time with the updated Bentayga, it continues to be a brilliantly luxurious machine with impressive capability. The most obvious and significant changes are to the exterior styling, which has hardly been the Bentayga's strong point. There are new round headlights with a cut crystal design like on other recent Bentleys. The grille has been enlarged, and the front bumper has a sportier design with an integrated spoiler. On the side, the fender vent has been lengthened and mounted higher, while the rear now has slim oval taillights and oval exhaust outlets. Those taillights have the same kind of cut crystal design as the headlights. The changes are subtle but effective at sprucing up the Bentayga, but they also donÂ’t make existing Bentaygas look out of date. ItÂ’s a similar situation inside. The biggest changes are in the center of the dashboard. The upper air vents are thin and horizontal instead of circles, and they've been relocated with the dash clock to sit mostly on top of the dash instead of nestled into it. Below them is a larger, 10.9-inch infotainment system that spans the whole width of the center stack and looks better integrated than the old version. The back seats can be configured to have nearly 4 inches more legroom, and thereÂ’s a larger touchscreen remote and available rear air vents for the bench seat configuration. Beyond that, the interior is mostly the same, which is hardly a complaint. This is a Bentley, after all. Essentially every surface is wrapped in soft leather, adorned with rich wood trim or made of weighty knurled metal. And customers have access to a vast variety of colors and combinations to create a genuinely custom cabin. There are a few low-ish points. The infotainment system isnÂ’t the most responsive, and it can be a little tricky to find the menu you want. Also, and this is a bit of a car journalist nitpick, you can spot some bits pilfered from the Audi parts bin: the turn signal and washer stalks, the headlight knob, and the underlying menus and layout of the instrument panel.

Bentley Continental GT3-R is a limited-edition racer for the street

Limited to just 300 examples worldwide, Bentley's new GT3-R is set to bring a bit of the brand's motorsports pedigree to the street. After all, the Flying B recently took the win at the Blancpain Endurance Series at Silverstone with its new Continental GT3, less than one year after the big racer's debut.
Like the road-going Conti GT, the GT3-R uses a twin-turbocharged 4.0-liter V8, tuned in this application to 572 horsepower and 516 pound-feet of torque - increases of 51 hp and 14 lb-ft from the already potent GT V8 S. That's enough to get the 4,839-pound Bentley to 60 miles per hour in just 3.6 seconds, on its way to a top end of 170 mph.
To make the GT3-R more hardcore than standard Continentals, the air suspension has been retuned, the brakes have been upgraded with carbon silicon discs, and there's a titanium exhaust that's good for 15 pounds of weight-savings - in all, the GT3-R is some 200 pounds lighter than a comparable GT V8 S.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.