2009 Bmw X5 Xdrive30i on 2040-cars

Auto blog

BMW makes the M4 extra special with a huge wing

BMW has all of the bases covered in its lineup, especially when it comes to its 4 Series models. Don't like going to the track? There's the BMW 430i and 440i, which are available as a coupe and gran coupe. Drivers looking for a track-friendly car that can also be used on the road will be steered toward the M4. BMW even built the hardcore M4 GTS for drivers that spend all of their time on a track. Now, it looks like BMW is trying to bridge the gap between the M4 and the M4 GTS with a special-edition model. Our photographers caught BMW testing an M4 with some extreme aerodynamic components around the Nurburgring. With its aggressive front end, massive wing, and sporty rear diffuser, the prototype M4 appears to be similar to the special-edition M4 Competition Sport that BMW released in Spain. The Spain-only special edition was marketed as a softer version of the M4 GTS with less power and usable rear seats. With a similar look and visible rear seats, this prototype indicates a similar track-focused special edition model. Since the M4 is only a few years old, it's unlikely that BMW is testing a new model, but the automaker could be testing aerodynamic components for a refreshed model down the road. A cheaper, more usable M4 GTS, though, would be the perfect car to round out BMW's current lineup. Related Video:

BMW names new CEO, chairman and head of development

Big changes are afoot in the top ranks at BMW, as the Bavarian automaker has announced not just one, but several appointments in the top floors of its towering headquarters in Munich in what the company itself is referring as "a generational change" in its leadership. The biggest change relates to the chairman of BMW's management board – German-speak for the company's chief executive officer. Effective at the end of the company's Annual General Meeting on May 13, 2015, the company will be run by Harald Kruger. The 49-year-old mechanical engineer has been with BMW since 1992 and has sat on its board since 2008, and has until now been responsible for production for the entire BMW Group. The chairmanship of the board of management currently belongs to Dr. Norbert Reithofer, whom the management is endorsing to chair the supervisory board (which Americans might call the board of directors). That role in turn is currently held by Professor Joachim Milberg, who will step down from his position in order to make way for Reithofer to take his place. Milberg is earmarked to remain with the company to oversee its corporate social responsibility and charitable activities. BMW has also announced the appointment of Klaus Frohlich to serve as its head of development with immediate effect. In his new capacity, Frohlich replaces Dr. Herbert Diess, who in turn has left Munich to take over the Volkswagen passenger car division. Below you'll find statements from both BMW and VW on their new appointments. BMW Group takes steps to initiate a generational change at the head of the Board of Management and Supervisory Board 09.12.2014 - Harald Kruger to become Chairman of the Board of Management in May 2015 - Dr. Norbert Reithofer proposed to succeed as Chairman of the Supervisory Board - Prof. Joachim Milberg to take leading role in the BMW Group's worldwide CSR activities and charitable foundations - Klaus Frohlich appointed to Board of Management with responsibility for Development Munich . At its meeting today, the Supervisory Board of BMW AG took the first steps to initiate a generational change at the head of the company's Board of Management and Supervisory Board. Harald Kruger will become Chairman of the Board of Management effective the end of the Annual General Meeting on 13 May 2015. The current Chairman of the Board of Management, Dr. Norbert Reithofer, will be put forward for election to the Supervisory Board at the 2015 Annual General Meeting.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.