2007 Bmw X5 3.0 on 2040-cars

Auto blog

BMW 4 Series spied with its future competition

BMW showed off its new 4 Series coupe in concept form at the 2013 Detroit Auto Show earlier this year, but it won't be long before we see the production model, evidenced by this modestly camouflaged prototype spotted testing. In case you forgot, the 4 Series serves as the replacement for the two-door versions of the BMW 3 Series, just as the upcoming 2 Series will effectively be the new version of the 1 Series coupe and convertible sold in our market.
This isn't our first glimpse of the 4 Series out testing, and we've even spied its droptop, Gran Coupe and too-hot M4 kin. We don't expect the final design to stray too much from the concept car seen in Detroit, albeit without the normal conceptual goodies like oversized wheels and with the overstyled front fascia toned down a bit. Our spy photographers even caught the 4 Series coupe hanging out with an Audi A5, giving us a good glimpse at how the two cars will stack up in terms of size and design.
It's still unknown exactly what engines will power the car when it comes to production, but since this thing is a derivative of the 3 Series, we expect the usual range of turbocharged four- and six-cylinder engines to be available, likely in 428i ad 435i guise (though, to be fair, the larger 640i coupe uses a 3.0-liter turbo engine, so there's even the potential for 440i nomenclature to work its way into the mix). We'll have to wait until the car officially bows later this year to know for sure.

BMW X4 opens up alongside its boxier brother

It doesn't seem so long ago that BMW (not to mention Audi, Volvo and a handful of other European automakers) weren't in the crossover market. But it's been over a decade since BMW began producing the first-gen X5, and in the fourteen years since, the Bavarian automaker has steadily expanded its portfolio to include the X1, X3 and X6.
The next to join the family will be the X4, which is essentially to the X3 what the X6 is to the X5. That is to say, basically the same vehicle, only with an (arguably) more stylish but less utile roofline. Previewed in concept form at the Shanghai Auto Show half a year ago, the X4 has been snapped by our plucky paparazzi in the past, but this is the first time we've seen inside.
Not only that, but the prototype in question was spotted next to the current X3 on which it is based, which gives us ample opportunity to see the differences between them. Of course, that still primarily comes down to the slantback profile, because otherwise, the two are essentially the same inside and out. Or at least they will be: many of the differences between the two are expected to port over to the X3 when it's refreshed next year, including some subtle interior upgrades - just not the roofline.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.