2004 Bmw X5 4.8is Very Rare on 2040-cars

Auto blog

BMW recalls over 76k 2012-2014 models over brake failure

Bimmerfest is reporting that BMW has notified the National Highway Traffic Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3 and Z4 models due to a possible loss of power brake assist that could result in the vehicles failing to stop. The recall affects 2012-2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power brake assist. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.

Popular Mechanics Breakthrough Awards honors GM Super Cruise, BMW i3

Our friends at Popular Mechanics have announced the winners of their 2013 Breakthrough Awards, which honor innovations and new technologies in a variety of fields, ranging from medicine to electronics to space travel. Among the winners were a pair of automakers.
The BMW i3 was named one of PM's product breakthroughs, and while the diminutive city car has a range comparable to other electrics, Popular Mechanics was impressed the i3's use of carbon-fiber-reinforced plastic, which allows the i3 to tip the scales at just 2,800 pounds. But the i3's space-age materials wouldn't have been such a smash if it were priced beyond what the general public could afford. BMW's ability to offer a vehicle with such an advanced construction for around $42,000 (nearly half the price of the Cadillac ELR and only about $7,000 more than a Chevrolet Volt or Ford Focus Electric) is wildly impressive and speaks volumes about the future of ultra-light composites in the auto industry.
The other big winner comes from General Motors, which was named an Innovator this year for its semi-autonomous Super Cruise technology that's currently being tested on a Cadillac SRX. The technology, which we've reported on before, combines adaptive cruise control and lane centering into a super system that will allow hands-free driving under certain conditions.

BMW i3s traction control tech going in all BMW, Mini cars

The BMW i3s is essentially a warmed-up version of the i3 electric car we all know and love. The performance boost isn't huge — just 14 horsepower and 15 pound-feet of torque — but it also gets a new suspension, wheels and tires as well as an improved traction control system. We found the car to benefit from all the updates when we drove it for our First Drive Review, but now BMW has offered up more details on just how the traction control system of the i3s helps make it better to drive. The company says it'll expand the technology to all future BMW and Mini models as well. The i3s's system is calibrated to help it to pull away quickly from a stop, making full use of the instantaneous torque offered by the electric motor. It also improves stability when accelerating out of corners, when using regenerative braking and, of course, when the road conditions are less than ideal. The results are palpable, and with the other improvements the i3s definitely feels stronger off the line, as we found on our drive. It's also about a half-second quicker to 60 miles per hour, at 6.8 seconds. The secret is in the response time of the stability control, which BMW claims is 50 times faster than the conventional system. This is made possible by moving the control process into the powertrain itself, rather than a remote unit. This reduces the signal path and, thus, the response time of the traction control system. BMW's Head of Chassis Development, Peter Langen, said of it, "With their high levels of torque and instantaneous responses to every movement of the accelerator, electric motors already make significantly higher demands on driving stability systems than conventional power units." While engineered to make the most of the electric motor, BMW says the shorter cycles of this traction control system show promise for internal combustion vehicles as well. As such, we'll begin to see the improved technology applied across the BMW and Mini lineups going forward. Related Video: