BMW 5-Series, page #74

BMW 5-Series Price Analytics

About BMW 5-Series

Auto blog

NHTSA releases updated Takata airbag recalled cars list, but it still has errors

Unfortunately, the government's list still contains errors.
The National Highway Traffic Safety Administration has issued an updated list of vehicle models that it's urging owners to repair under the mushrooming Takata airbag inflator recall. The latest version adds vehicles from new automakers like Subaru and Ford that are missing from the original announcement, and it also removes erroneous entries from General Motors, leaving only the 2005 Saab 9-2X (a reskinned Subaru WRX), and the 2003-2005 Pontiac Vibe, a joint project with Toyota.

EPA: Four 2014 Mini Cooper models need to drop mpg numbers

After the huge problems that Hyundai/Kia experienced with its mislabeled fuel economy labels, you'd think that any time an automaker has to adjust its mpg numbers, heralds would be shouting from the rooftops. But, after Ford admitted to three big mistakes with its numbers for the 2013 C-Max Hybrid and Mercedes-Benz had to lower the fuel economy rating for the C-Class, we understand if those heralds are a bit tired by now. The models affected include the 3-door and the 3-door S. Still, today's news is that BMW has to lower the fuel efficiency numbers for four versions of the 2014 Mini Cooper thanks to an audit conducted by the EPA and then some joint re-testing. The models affected include the 3-door with the 1.5-liter engine and the 3-door S with its 2.0-liter powerplant, with both manual and semi-automatic transmissions. As with the Benzes, the rating changes are not big ones, around one or two miles per gallon. The big exception is the manual S 3-door's highway number, which lost four mpg from 38 to 34. You can see all the numbers, new and old, in the press release below, but the EPA isn't saying what caused the problem this time. The Agency's new test procedures can't come fast enough. It should be noted that the 2015 Mini Cooper was recently delayed a bit because of the extra time it took to get the EPA numbers right. There's no confirmation that these two items are connected, but we would not be surprised to hear they were. EPA Requiring BMW to Correct Fuel Economy Labels for Four Mini Cooper Vehicles Washington - The U.S. Environmental Protection Agency (EPA) is revising estimates for four 2014 BMW Mini Cooper vehicles to ensure consumers are given accurate fuel economy values. The EPA performed a fuel economy audit on the BMW Mini Cooper and obtained values that differed from those BMW submitted to EPA for certification. With EPA oversight, BMW conducted new emissions and fuel economy testing, and EPA conducted its own testing at its National Vehicle and Fuel Emissions Laboratory in Ann Arbor, Michigan. As a result of this subsequent testing, EPA is requiring BMW to relabel four of its 2014 Mini Cooper models with lower fuel economy values. The specific changes to fuel economy stickers are listed in the table below.

BMW celebrates with M4 DTM Champion Edition

Go back just a few seasons, and Germany's DTM touring car series was a straight-up competition between Audi and Mercedes-Benz. But BMW rejoined the race in 2012, winning both the drivers' and constructors' titles on its first year back and celebrating with a special matte-black M3 DTM Champion Edition. Last season, it won the constructors' championship but not the drivers', and this year it did the opposite. In short, it's been an impressive comeback for the Bavarian automaker, and to celebrate this year's accomplishments, it's followed up with the new M4 DTM Champion Edition for Europe you see here.
Based on the new M4 coupe - which forms the basis for BMW's DTM challenger as well as its pace car - the Champion Edition is distinguished by its special livery: The orange grille frame, the matte black hood and trunk with multicolored stripes, the black stripes along its shoulder and rocker panel, and the blacked-out 19-inch wheels all to pay homage to champion Marco Wittmann's racecar, as does special lettering on the rear windows.
Other enhancements include black front splitter and skirts, carbon front flaps and mirror caps, rear spoiler and carbon diffuser, while autographed sill plates and carbon interior trim with the car's serial number adorn the cabin. Only 23 examples will be offered, symbolic of the number adorning the winning tin-top racer and the flank of this special edition as well.

2015 Green Car Of The Year finalists announced, run alt-fuel gamut

The 2015 edition of the Green Car of the Year award is following right in the footsteps of previous years with a variety of alt-fuel powertrains making the just-announced finalists list. You've got your plug-in vehicle (the BMW i3), your compressed natural gas (the Chevy Impala Bi-Fuel), your high-efficiency diesel (the Audi A3 TDI), your 40+ mile-per-gallon gas engine (the Honda Fit) and, finally, a car that can do a little bit of everything (the VW Golf). The Golf is available – at least in some parts of the US – with three different powertrains: a 2.0-liter diesel, a gasoline engine and all-electric drive. The Impala can burn either natural gas or gasoline in its 3.6-liter engine. The A3 is an efficiency champ, able to get 73.5 mpg on some European tests. The i3 can be a pure electric vehicle or come with a short range extending engine. And the Fit brings 41 miles to the gallon in a practical, affordable package. The GCOY award is announced every year at the Los Angeles Auto Show by Green Car Journal. The committee doesn't just take the fuel-saving technology into account, but also a vehicle's "availability to the mass market." Last year, the Honda Accord Hybrid/Plug-In Hybrid won top honors, following up on wins from the Ford Fusion models (plug-in hybrid and hybrid) for 2013, the Honda Civic Natural Gas for 2012 and the Chevrolet Volt for 2011. FINALISTS ANNOUNCED FOR 2015 "GREEN CAR OF THE YEAR"" Green Car Journal to Reveal Winner of 10th Annual Award at LA Auto Show" Press & Trade Days, November 20 LOS ANGELES, CA (October 21, 2014) – Green Car Journal has announced its five finalists for the magazine's high-profile 2015 Green Car of the Year® program. The 2015 models include the Audi A3 TDI, BMW i3, Chevrolet Impala Bi-Fuel, Honda Fit, and VW Golf. The Green Car of the Year® award, an honor widely recognized as the auto industry's most important environmental accolade, celebrates its 10th anniversary this year. An increasing number of vehicle models are considered for the Green Car of the Year® program each year, a reflection of the auto industry's expanding efforts in offering new vehicles with higher efficiency and improved environmental impact. Green Car Journal has been honoring the most important "green" vehicles every year at the LA Auto Show, since its inaugural award announced at the show in 2005.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.

Watch this BMW take flight at Viru Rally

An E36 BMW 3 Series might be a good choice for a lot of purposes - a long road trip, a track day, rallycross, impressing your friends... but a full-on rally? It's rear-drive when the best rally machines are front- or all-wheel drive. But that didn't stop Pritt Koik and Alari-Uku Heldna from entering their stripped-out E36 in the Viru Rally in Estonia... or from getting some big air time when they did.
Fortunately the jump was not just caught on video... it was caught on video from three angles: two from the side of the rally stage and one from inside the cockpit. Check out all three below to see how this particular BMW got back into the aircraft business.

NHTSA urges owners of recalled Takata airbag vehicles to take immediate action

The National Highway Traffic Safety Administration and the Department of Transportation are taking the unusual step of issuing a followup press release urging owners of certain recalled vehicles "to act immediately" to fix their cars and trucks. The problem in question concerns the repair campaigns for rupturing Takata airbag inflators issued in June and covers a long list of models from Toyota, Lexus, Honda, Acura, Mazda, BMW, Nissan, Infiniti, Buick, Cadillac, Chevrolet, GMC, Oldsmobile and Pontiac.
While NHSTA doesn't specifically say why the recall is vital in the new release, Toyota's own explanation in its newly announced renotification campaign earlier today sheds some new light on the topic. According to the Japanese automaker, in testing, Takata found a possible link between the rupturing airbag inflators and high humidity. NHTSA is advocating that all owners pursue repairs immediately if they haven't already done so already. This is especially crucial for those drivers especially in Florida, Puerto Rico, Guam, Saipan, American Samoa, Virgin Islands and Hawaii because of the humid conditions there.
We don't need to tell you how dangerous an inadvertent airbag deployment could be - even in a stationary vehicle - but adding to the Takata issue is fears that the deployment could lead to shrapnel being sprayed into the cabin.

Corvette gets slidey with Britain's best performance cars

Autocar wants to find Britain's best driver's car, and it's challenging a murderers' row of some of the world's best performance vehicles to find out, including the latest Chevrolet Corvette Stingray. All of them were therefore assembled at the Castle Combe Circuit to find a winner.
If it wants to take the crown from this pack of mostly European competitors, the 'Vette has to beat some steep competition. Its challengers include monsters like the Ferrari 458 Speciale, Ariel Atom 3.5R and Jaguar F-Type Coupe. As a further hurdle for the winner to clear, Autocar also has last year's champ among the fighters - the Porsche 911 GT3.
Even if you're not at all interested in the C7, there's still something here for practically any fan of fast cars. The competitors include relative oddities among the pack like the Renault Mégane RS Trophy and Alfa Romeo 4C. Plus, Autocar has some well-positioned microphones that let you hear the Atom wailing like a banshee and the roar of the 458 Speciale. Check out the video to see which one of these all-stars takes home the award this year.

Six luxury-car features I'm ashamed to admit I love

A hot compress felt wonderful on my sore back. The methodical kneading of my shoulder blades loosened the knots that formed over several hours of driving. The Swedish-style pulses firing into my lumbar region released more tension.
I wasn't getting a much-needed massage following a recent road trip. I was getting it during the road trip.
I grew up riding in the back seat of a 1976 Chevy Nova. But once you use these lux features, it's easy to go soft.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.