2011 Bmw 4dr Sdn 535i Xdrive Awd on 2040-cars

Auto blog

BMW's Vision Next 100 concept celebrates past, predicts future

Forecasting 100 years out is a tough job, so we'll forgive BMW if not everything in this concept comes true in the next century. It's the first of several that will celebrate BMW's centenary this year – concepts from Mini, Rolls-Royce, and BMW Motorcycles will follow later – and aims to guess what and how we'll be driving in the distant future. Although it's no longer a question of if, we still don't know when cars will make the switch to autonomous driving. So yeah, there's a lot up in the air. What this concept promises is more of everything. What this concept promises is more of everything: more comfort, more assistance, and a more intense experience – when you want that. Plus new, lighter materials, increased customization, and of course all the connected smarts you can throw (or will be able to throw) at a set of four wheels and some seats. It starts inside with an out-there dashboard display. Going a step further from the typical head-up display, the Alive Geometry transforms everything in your periphery into a digital blanket of context stretching from the interior to some of the exterior panels. This tessellation of moving triangles is supposed to mimic a flock of birds to bring you subtly changing information about what's going on around you. BMW gives this idea the made-up term of 4D printing. BMW gives this idea the made-up term of 4D printing, as it believes that in 30 years it will be possible to rapidly prototype this flock-of-informative-seagulls design to provide function (the fourth dimension, apparently?) in addition to the physical form. We'll check back in 2046. BMW also notes that displays in current cars will give way to OLED displays and then to the windshield-as-display concept that has been promised for a while and is seen here. About the car driving itself: BMW highlights two new driving modes for the concept, Boost and Ease. Boost is for when the driver is in control, the vehicle doing what it can to heighten the experience and the driver's awareness. It can use the Alive Geometry to show the best line or warn of other cars, integrating all the current active safety tech and more. BMW believes this will allow the driver to improve instead of just going faster. We would have called this mode iStillDriveSometimes, but hey, marketing still has 100 years to come around to that one. The important idea is that the driver will still have the choice to drive.

BMW Motorrad showcases Konzept eRR electric sport bike

At one end of the BMW spectrum are its electric vehicles like the i3 and i8. At the other, the motorcycles from BMW Motorrad. Now the Bavarian manufacturer is bringing those two areas of competence together in one vehicle. And it only has two weels. It's called the eRR, and it's an experimental electric motorcycle created in conjunction with the Technical University of Munich. It's based on the frame of the S 1000 RR sport bike, but ditches the 199-horsepower four-cylinder liter engine for an all-electric powertrain. Unfortunately, the company has yet to release any technical details, but promises it will do so at a later date. It's not the first time BMW Motorrad has tinkered with electric power. We've already seen the C Evolution electric scooter. But this is the first time it has packaged an electric motor into a sport bike this aggressive. If BMW were actually to build this thing, the eRR could prove a suitable foil to the Brammo/Victory Empulse, not to mention any other electric motorcycle that may find its way onto market in the coming years. BMW Motorrad presents the experimental vehicle eRR. Supersport dynamism and zero emission thanks to electric power. Munich. BMW Motorrad has a long tradition in pointing out new ways and thoughts for the topic „mobility on two wheels". For that, again and again many studies were presented in the past giving views to the future. The experimental vehicle eRR, created as a project with the Technical University of Munich, embodies an idea of an electric powered supersport motorcycle made by BMW Motorrad. Already a couple of years ago, BMW i showed the BMW Group's visionary and sustainable approach with the vehicles BMW i3 and i8 and their revolutionary design principles (aluminum chassis and passenger cabin made from carbon fibre) and BMW Motorrad's C evolution proved, that zero emission, riding fun and practicability do not exclude themselves. With presenting the experimental vehicle eRR BMW Motorrad goes one step forward and shows the possibilities of an all-electric drive in a supersport motorcycle. Regarding design and chassis technology the eRR leans on the supersport motorcycle S 1000 RR, however using an all-electric drive. Stephan Schaller, Head of BMW Motorrad, emphasizes: „Since their market launch, the RR is giving the creeps to motorsport athletes. If acceleration, handling or topspeed – the RR is setting standards.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.