2008 Audi S4 Cabriolet Convertible 2-door 4.2l V8 on 2040-cars

Auto blog

2015 Audi Q3 headed for Detroit before hitting US showrooms this fall

The market for small premium crossover vehicles continues to grow in popularity here in the US, and Audi is finally ready to get in on the action. Going up against competitors like the BMW X1, Land Rover Range Rover Evoque and soon-to-arrive Mercedes GLA-Class, Audi will unveil a US-spec version of the 2015 Q3 at the Detroit Auto Show next week. And in what we can only assume is an amusing coincidence, the Q3 will go on sale during Q3 of this year.
As we reported back in October, it appears that our Q3 will boast a slightly taller ride height than its European counterpart, but Audi isn't releasing too much information about the crossover just yet. What we know for sure is that it will be powered by Audi's well-liked 2.0-liter turbocharged TFSI inline-four producing 200 horsepower and 207 pound-feet of torque. A six-speed automatic transmission and front-wheel drive will come standard, while Audi's Quattro all-wheel-drive system will be optional.
Visually, the 2015 Q3 shown here has a different front fascia design than its European counterpart, but it's not immediately clear if this is exclusive to the US model or if it will be a new element for Q3 in all markets. We don't expect pricing to be announced until closer to its on-sale date, but the Q3 will definitely be stuffed with content, even in base form. Audi has already confirmed such niceties as a panoramic moonroof, Xenon headlights and heated leather seats. Delivering a good amount of practicality for its size, the Q3 will provide a maximum cargo capacity of up to 48.2 cubic feet and 16.2 cu-ft with the rear seats in place.

Audi 4.2-liter V8 to live again in next-gen R8

Fellow auto enthusiasts, it looks like the car gods have smiled upon us. Word is that Audi's stupendous 4.2-liter V8 will once again be available in the next-generation R8. Rumors pegged the trusty 4.2 as a dead engine revving, thanks to Audi's newer 4.0-liter twin-turbocharged V8 found in models like the S6 and S7.
We expected the 4.0-liter to be the go-to engine in the next R8, but according to Car and Driver, there have been some issues cooling the force-induced mill in the mid-engine R8. The issues are so severe, in fact, that the 4.2 is going to be retained in the car's second generation.
It's more than just practical matters like cooling that are keeping the R8 from going turbocharged. C/D reports that even with the current state of forced induction, a turbocharged R8's throttle response and its resultant exhaust note would suffer too much to be feasible.

Audi boosts A3 Sportback e-tron plug-in hybrid production to 50 a day

Should we try to translate "Damn the torpedoes, full speed ahead" into German? Audi might force us to do that. That's because the German automaker has stepped up production of its new plug-in vehicle – the A3 Sportback e-tron plug-in hybrid – which is never a bad thing. Audi was circulating prototypes of the PHEV as early as 2012 and launched production this summer at a clip of 30 vehicles a day. Now, the company is saying that it's upped that daily production rate to 50. That's not exactly Ford F-150 manufacturing territory, but it's a pretty good sign that more Europeans are clamoring for the plug-in than Audi expected. The A3 E-Tron is priced at about $51,000 in Germany and pairs a 1.4-liter gas-powered engine with an electric motor to produce 204 horsepower and get the car from 0 to 60 miles per hour in less than seven and a half seconds. More impressively, the A3 Sportback e-tron plug-in hybrid can go 30 miles on electricity alone plus another 550 miles on gas power, and gets a Euro-based fuel-economy rating of a monstrous 156 miles per gallon. Check out Audi's press release below and take a look at our drive impressions here. On the line and on time: Production of the Audi A3 Sportback e-tron • First plug-in hybrid model drives off the assembly line in Ingolstadt • Assembly processes integrated into the A3 line • Maximum safety for employees, top quality for customers Production of the Audi A3 Sportback e-tron: Assembly – On the engine and component assembly line, the electric motor and transmission are fitted to the engine. Approximately 50 cars every day, with the same timing and on the same assembly line as the other models: Audi is now ramping up production of the Audi A3 Sportback e-tron*. The premium manufacturer is producing its first plug-in hybrid model at the brand's main plant in Ingolstadt. "We started series production of the Audi A3 Sportback e-tron in the summer," said Dr. Hubert Waltl, Board of Management Member for Production at AUDI AG. "Most of the assembly work is integrated into the A3 line; no separate manufacturing is necessary. That demonstrates the flexibility and efficiency of our production planners and employees." With the Audi A3 Sportback e-tron, Audi is launching the mobility of the future. The compact five-door combines a 1.4 TFSI combustion engine with a 75 kW electric motor, resulting in a total system output of 150 kW (204 horsepower).