Aston Martin Vantage, page #14

Aston Martin Vantage Price Analytics

About Aston Martin Vantage

Auto blog

Aston Martin Rapide E opens four doors to the company's electric future

At last, the production Aston Martin Rapide E is ready to dance. Developed in conjunction with Williams Advanced Engineering, the carmaker and the Formula One engineering firm did their best to make the most of an aged platform that was last combined with a 595-horsepower V12. In place of the 6.0-liter 12-cylinder, gearbox, and gas tank in the Rapide AMR, there now sits a 65-kWh battery sheathed in a carbon fiber and kevlar case. It powers two electric motors on the rear axle, the power figures a combined 604 hp and 700 pound-feet of torque. The juice powers the 4,387-pound fastback to a 4.2-second dash to 62 miles per hour. Range is said to be 200 miles on the WLTP cycle, which could mean anywhere from 140 to 180 miles in our numbers. The 800-volt electrical architecture permits charging rates of 300 range-miles per hour when hooked up to the proper outlet delivering 100 kW or more. On top of that, since Aston Martin only plans to build 155 examples of the Rapide E at the carmaker's new St. Athans, Wales, facility, the cries about range anxiety should be muted. The aluminum and carbon fiber bodywork has been submitted to a regime of aero efficiency and shedding superfluous ICE bits. Honeycomb fills the grille aperture and housings formerly used for fog lights, while less air is allowed to flow through the bodywork. A new underfloor hooks up to a larger rear carbon fiber diffuser. The 21-inch forged aero wheels wear low-rolling resistance Pirelli P Zeros. Three driving modes work with an adaptive suspension and limited-slip differential, in an attempt to keep the powertrain swap from eliminating the brand's trademark thrills. Inside, a 10-inch digital display supplants the horologically jeweled dash cluster Aston Martins are known for. A companion app conveys typical EV information remotely, and can also tell owners where the car is parked and provide walking directions to the spot. The Rapide E order book is open now, the price only disclosed "on application." Aston Martin's electric future begins now, and James Bond will be the first person to make the trip there.

First Aston Martin DB4 GT Zagato continuation body completed

Last fall, we reported how Aston Martin was bringing back the DB4 GT Zagato model as a continuation series of 19 cars to celebrate Zagato's 100 years. Building the new classics has begun at Aston's Heritage Division at its Newport Pagnell facility, and the first body has now been completed. Aston Martin says the cars, which are only sold paired with new DBS GT Zagatos, are built using "a blend" of David Brown-era old-world craftsmanship and modern applications. As an example, a digital body buck now exists to help craft the panels, which are hand-formed from 1.2-millimeter-thick aluminum sheets in 1950s style. The adjacent gallery shows the unhurried style in which these very limited-edition, new/old Astons are built, and how a ball-peen hammer is still the tool of choice there. Underneath the aluminum, in a lightweight tubular frame, sits a Tadek Marek-designed 380-horsepower "twin spark" straight-six engine, paired to a four-speed manual gearbox and a limited-slip differential. Power is up about 50hp in comparison to an earlier DB4 continuation model. We only need to take a look at classic Astons to see what the DB4 GT Zagato continuation cars will look like, but the design of the modern DBS GT Zagato counterparts is still to be officially revealed. The DBS Superleggera-based twin-turbo V12 cars were previewed in a set of renderings late last month, and they are expected to come with at least 715 horsepower and 664 lb-ft of torque. The continuation DB4 GT Zagatos will reach owners in the third quarter of 2019, and the DBS GT Zagatos will follow in 2020. The car combos are priced at almost $8 million. Featured Gallery Aston Martin DB4 GT Continuation Build Image Credit: Aston Martin Aston Martin Classics zagato

Aston Martin Project 003 details revealed in dealer brochure

Aston Martin showed the as-yet-unnamed Project 003 hypercar at the 2019 Geneva Motor Show. Now that the English carmaker is accepting deposits for the coupe, it has provided dealers with brochures for prospective customers. Two of those prospective customers let Carscoops and Diario Motor flip through the pages and see what the fuss is about. Each site words some of the specifics a bit differently, which we're not sure is down to the language in the brochure or the way it's written up. Carscoops says Aston Martin's targeting a combined 1,000 horsepower, DM says there will be 1,000 hp. Either way, it's a pleasant ballpark to play in. We say "combined" because there will be a brand new twin-turbo V6 in back and an electric motor on the front axle. The duo means all-wheel drive in addition to that potential four-figure horsepower. If Aston Martin does hit 1,000 ponies, that would put the "son of Valkyrie" just behind the Valkyrie, which makes all of its 1,160 hp with a naturally aspirated 6.5-liter V12 built by Cosworth. The brochure says dry weight will come in below 1,350 kilos, or 2,976 pounds. The brochure also asserts a power-to-weight ratio of 750 bhp per tonne. Working backward, that ratio would mean 1,012 hp if the 003 came in right at 2,976 pounds. Shifting through an F1-inspired eight-speed dual-clutch gearbox, the carmaker expects a 0-60 time of "less than 2.5 seconds," to be expected for a car about 100 pounds heavier than a McLaren 720S with at least 200 more horsepower. And according to Diario Motor's telling, top speed will crest 350 kilometers per hour, or 218 miles per hour; Carscoops says terminal velocity lies beyond 220 mph. Lots of Valkyrie tech will be adapted for the junior coupe, including the active suspension and active ride height, as well as platform control. A limited-slip differential will keep the back end in line with what we're sure will be fancy electric motor control on the front axle. Seems all that was said about the sci-fi cabin — which TopGear magazine's Jack Rix showed us recently — is that ingress and egress will be less challenging than on the Valkyrie. Only 500 units will leave the factory, in both left- and right-hand drive, deliveries to begin in 2021. American purchasers will need to leave $300,000 with their dealers to hold a place in line. Those monies will be applied to an MSRP that starts "at no less than GBP875,000" before options, or roughly $1.2 million in green money. AM-RB 003 View 9 Photos

Aston Martin DBS GT Zagato previewed in renderings

Last fall, Aston Martin and Zagato announced that they would be building special continuation versions of the DB4 GT Zagato to celebrate the Italian design house's 100th anniversary. But the two companies wouldn't stop there, as each DB4 would come with an yet-to-be-revealed DBS variant. Now the companies have released detailed renderings and information about what is officially called the Aston Martin DBS GT Zagato. The car will be based on the hottest DB11 model, the DBS Superleggera. That means it should have a twin-turbo V12 making at least 715 horsepower and 664 pound-feet of torque with all of that going to the rear wheels through an eight-speed automatic. Outside of the bones, the DBS GT Zagato will have a thoroughly revised exterior. As shown in the photos, the front grille is one piece and is more reminiscent of what's found on the smaller Aston Martin Vantage. An exaggerated double-bubble roof is a highlight, and it stretches out to the pointy tip of the tail. The hood echoes the double bubble in its center. The taillights have an afterburner shape that Zagato has favored lately. Neither Aston nor Zagato has said when we'll see the actual car, but we expect it will be shown sometime this year. Buyers will start getting their DBS GT Zagatos at the end of 2020, a year after their DB4 GT Zagato continuation cars are delivered. As a reminder, the price for each of the 19 pairs of cars is 6 million pounds, or $7.93 million at current exchange rates and before taxes.

'Top Gear' takes us inside the Aston Martin Project 003

"Top Gear" magazine's Jack Rix might be the ideal lad to lock in a room with a cool car and a camera. After taking us on tours of the Mercedes-AMG One and Honda Urban EV concept, he's wandered into another anteroom with the Aston Martin Project 003 and Vanquish. When we saw the mid-engined coupes at the Geneva Motor Show, it looked like Aston Martin programmed the Valkyrie family's design language to "softer" on the RMB-003 and "softest" for the Vanquish. We wanted more details. Cue Mr. Rix. The deputy editor fills us in on trivia like the combined weight of the Project 003 headlights and taillights being less than the weight of a single DB11 headlight. He also shows us how the NASA-aided FlexFoil wing works, and where the potential rear-view cameras would be mounted. Then he gets inside an interior that's "a bit more civilized" than that on the Valkyrie for not putting hip level beneath knee level. However, notice that here, too, the seat is built into the carbon fiber tub — the end of the seat bolster is flush with the footwell. And check out those vents that triple as speakers and ambient lighting. Rix can only walk around the Vanquish, since that car's not due until 2022, a year after the Project 003. Nevertheless, there are plenty of Easter eggs to share, like how design elements from front-engined Aston Martins have been integrated throughout the mid-engined bodywork. As a bonus feature, Aston Martin has taken a separate look at Valkyrie development through the eyes of high-performance test driver Chris Goodwin. The racer explains how he's using the Red Bull Formula 1 team's simulator to tune the Valkyrie road car's handling, active suspension, and aerodynamic systems. Goodwin was McLaren Automotive's test driver and worked on the Speedtail, so it could mean something when he says of the Valkyrie, "It's going to be a substantial gap between this car and what's currently available on the market."

James Bond going electric in next film with Aston Martin Rapide E

England's The Sun newspaper, in a piece fabulously titled "The Spy Who Plugged Me ... In," reports that James Bond will drive an Aston Martin Rapide E in the next franchise installment. Quoting "an insider," it's said director Cary Joji Fukunaga is a "total tree-hugger" and pushed to include a more environmentally friendly set of wheels. Long-time producers Barbara Broccoli and Michael G. Wilson went along with it, Fukunaga's apparently working with Aston Martin on the show car. Nothing will be lost in the switch from horsepower to e-power, the Rapide E fitted with "all the high-tech gadgets" and starring in "the centre of an incredible action sequence in the movie." The Rapide E's appearance doesn't exclude a role for another Aston Martin, though. Bond drove a DB5 and DBS in " Casino Royale," then doubled up again in " Spectre" with a DB10 and DB5. We'd expect more than one Warwickshire product, in fact, since Bond cars don't tend to survive any "incredible action sequence." Since we can expect a raft of puns from the car's inclusion, let's go ahead and give a shout-out to Motoring Research who asked the question, " Do you expect me to torque?" Aston Martin plans to build 155 Rapide E sedans for any real-life tree-hugging spies. With Williams Advanced Engineering assisting development, the silent sedan contains a 64-kWh battery and 800-volt electrical architecture, powering a two e-motors with a combined output of 603 horsepower and 700 pound-feet of torque. The 0-60 gallop takes less than four seconds, top speed is 155 miles per hour, and range should crest 200 miles on the WLTP cycle. Fukunaga's directorial resume includes the Netflix film " Beasts of No Nation" and the first season of the HBO series " True Detective." He replaced director Danny Boyle at the helm after creative differences arose between Boyle and producers. Shooting should start next month at Pinewood Studios on what's known as Bond 25 for now, and reports say Oscar winner Rami Malek is a near-lock to play the villain. The Rapide E should be in showrooms at the end of this year, the film's release date slated for April 2020.

5 things to know about the Aston Martin Lagonda SUV

Though Aston Martin unveiled its Lagonda Sedan first, we were told that the British ultra-luxury electric/autonomous spinoff brand's first production car would be an SUV. Today, at the 2019 Geneva Motor Show, they took the wraps off an All-Terrain Concept: a battery-powered, autonomous-ready, all-wheel-drive crossover intended to presage that vehicle. We walked around, and sat in, the vehicle with Aston Martin Lagonda chief creative officer and design studio head, Marek Reichman, who provided us with all sorts of interesting insights about this new vehicle, and brand, which is expected to bow in 2021. Here are five things we learned. It Has a Hood for a Reason "The sedan was the most extreme version of this new design language, derived from the proportion of not having to have an engine, exhaust, driveline, or gas tank. This new concept has more of a hood, but by no means a typical SUV profile -- the windshield starts above the front axle line. This is because in an all-terrain vehicle, in all-terrain mode when you're going through snow or rough road, you want to feel protected. You want to see something in front of you." It's Huge Inside "Because of the powertrain, it has more space inside than a Rolls-Royce Cullinan, which is fully a meter [more than 3 feet] longer. Luxury now is about time and space. I can't give you time, but I can give you space." It Has Radical Materials Inside "Just like we are unconstrained by tradition on the exterior, we are similarly unconstrained in the interior. We've used materials that define modern, contemporary luxury. Not like the traditional values of an English country manor. So on the seats we have cashmere. On the key we have Swarovski crystals. On the headliner we have alpaca. And on the door cards, we have silks. This car will be built in Wales and many of these materials come from Wales." It's Luxurious and Utilitarian "Design is about solving a problem. In this case, it's about solving for a customer who needs more practical applications. So we've made the interior flexible. The front seats rotate for a future autonomous mode. But you can get fixed seats up front and move the rear sheets forward to allow room for a third row. Or you can move both rear rows forward and have more room for cargo. It's a redefinition of uses rather than trying to fit something into the box of what an SUV can be." It's Trendy and Anti-Trend "A designer's job is to see if a trend is going to burn out quickly or be long term.

Aston Martin Vanquish Vision concept coming for Ferrari F8 Tributo and company

Aston Martin will restore the Vanquish name on a mid-engined supercar due in 2022, previewed by the Vanquish Vision concept. To be powered by a less potent version of the hybrid twin-turbo V6 powertrain also going in the Project 003, the Vanquish will challenge super-coupes like the Ferrari F8 Tributo, as well as the next-generation hybrid successors to the McLaren 720S and Lamborghini Huracan. The Vanquish will be the fourth mid-engined offering from the Gaydon maker, after the Valkyrie, Valkyrie AMR-Pro, and Project 003, but the first to go into series production. In spite of the fact that it shares clear lineage with the Valkyrie and Project 003, the Vanquish will make some key departures. The chassis will be fashioned from bonded aluminum instead of carbon fiber. The concept is said to be 85 percent of the final form, with only minor changes to come as Aston Martin learns its way around a mid-engined production car for the first time. The forms are fuller, with less of the negative space employed on the hypercars for a "more seductive and less technical appearance." Aggressive touches remain, however, as in the fat rear tire leering through a hefty gap between the bodywork and a serious diffuser. And check out those exhaust tips poking McLaren-style out of the bodywork. Codenamed AM9, the coming coupe departed from Aston Martin's own expectations in that it got smaller than originally envisioned. Palmer told Autocar, "One of the real learnings with Adrian Newey is obsession with weight and mass, and package size. Our designers are now pushing our engineers; cars were getting bigger but now we're heading smaller, with cars packaged around the engine. It's the reversal of a trend." Related Video:

Lagonda All-Terrain Concept previews electric SUV shaped by planetary forces

Coming soon to an ultra-wealthy desert oasis near you is Lagonda, the spinoff from Aston Martin that will be devoted to creating luxury cars rather than sports cars. They will be electric and have autonomous driving features, and although their final production guises are still to be revealed, the Lagonda All-Terrain Concept introduced in Geneva provides a second clue as to what a production Lagonda might be like. Whereas last year's Vision Concept was a road-going quasi-sedan that mostly centered on autonomous driving, the All-Terrain Concept is going for the Range Rover crowd. Taller and obviously a crossover, Aston Martin describes it as "an ultra-stylish, supremely luxurious, fully electric, emission-free vehicle that can transport its occupants to remote and spectacular locations." It certainly isn't bereft of adjectives. Like other EVs, the concept utilizes a skateboard-style vehicle platform that spreads the battery weight low throughout the floor, which not only raises that floor to provide a more SUV-like view out, but actually lowers the center of gravity for superior handling. It also makes the car very stiff, which allows for the All-Terrain Concept's rear-hinged coach doors and flip-up gullwing roof bits. "The Lagonda All-Terrain Concept adds a hugely exciting sense of adventure to the unique brand of luxury, emission-free vehicles that Lagonda is planning to produce," said Aston Martin Lagonda President Andy Palmer in the press release. "This is a car that would be at home whisking someone straight from a glamorous red carpet event to a remote scientific research lab." Remote scientific research lab? Good grief. Who does this guy thinks his customer is, James Bond? Oh wait. The Aston design team drew design inspiration from super yachts, which can mostly be seen in the rear-leaning tail and severely swept-back profile. The high ground clearance and chunky fenders imply a certain degree of ruggedness that's not entirely dissimilar to the Rivian R1S. In terms of other styling details, well, take it away press release. "The surfacing is incredibly futuristic, with forms and shapes that look like they have been created by the huge, planetary forces of gravity fields." Okey dokey. The rear hatch is described as having a clamshell design, and it houses a thin LED strip hidden beneath a lip. This allows the light to be beamed downward and reflected out, thereby concealing the actual LED elements from the viewer. Nifty.

Aston Martin Project 003 is a road-going evolution of Valkyrie

The Aston Martin Project 003 will effectively be the most road-going example of Aston's mid-engined hypercars. It quite obviously draws heavily from the Valkyrie (aka Project 001), which is as much the result of aerodynamic requirements as it is maintaining a family resemblance. It may not appear to be as extreme in certain respects, and it isn't, but it does feature a number of advances. The 003 utilizes the next-generation of "aircraft morphing technology, to create a variable airfoil across the entirety of the rear wing. The technology named FlexFoil ... has been validated by NASA through extensive performance and acoustic flight testing, with Aston Martin the first to implement this cutting-edge aerospace technology in the automotive industry. The system allows for the car's downforce to be changed without changing the physical angle of the entire element." So yeah, fancy stuff, and in fact, the production version will feature an even further evolution of the technology. Aston hasn't released full details, but did indicate the 003 will be powered by a hybrid powertrain consisting of a new turbocharged V6 developed in-house. This is in contrast to the Mercedes-sourced engines in recent Aston Martins. It will feature a sealed oil system previously utilized in the Aston Martin Vulcan and in multiple 24-hour endurance races that allows for oil changes in 90 seconds and the refinement and reuse of the engine oil itself. The production 003 will be the first road-going car to receive this technology. There is plenty shared with Valkyrie, however, including the active suspension and various electronic systems. Aston says the chassis will be "blessed with next-level precision, control and driver connection for class-leading dynamics on road and truck." Also like the Valkyrie, Project 003 utilizes a lightweight carbon fiber structure with carbon fiber bodywork. It was shaped for maximum aerodynamic effect, which results in the two mid-engine hypercars sharing a common shape and general look. One noteworthy visual difference are the front and rear lighting units. Their lightweight technology are shared, however. Aston Martin says the 003's four lighting units weigh less than one DB11 headlamp. Inside is where the 003 most ventures away from the Valkyrie, and where it demonstrates its more road-going nature. Greater concessions have been made for usability and comfort, although that is certainly relative.