Aston Martin Lagonda, page #5

Auto blog

Aston Martin likely to resurrect Vanquish name for Ferrari fighter

Aston Martin recently hosted press drives for the new DBS Superleggera in Germany. On the sidelines, Motoring spoke to the carmaker's chief creative officer, Marek Reichman. Answering the question of whether the coming mid-engined rival to the Ferrari 488, Lamborghini Huracan, and McLaren 720 S could revive a very important name for the brand, Reichman responded, "Without saying yes, that sounds like a plausible solution for a beautiful name like Vanquish." The Vanquish named first appeared from 2001 to 2007, returning from 2012 until retiring again this year on the Vanquish S (pictured). Although it's historically been used on the most powerful vehicles in Aston Martin's range, and both of them V12s, the latest flagship switched to two erstwhile monikers in combining DBS and Supeleggera. Reichman said the switcheroo "better reflected [the DBS% positioning than Vanquish." The future V-named coupe will be out to conquer every vehicle in the segment, not just in the family line-up. Still light on details at the moment, we expect the Mercedes-AMG-sourced 4.0-liter twin-turbo V8 behind the seats, boosted by an electric motor. Reichman didn't shoot down the possibility of using an electric motor for e-AWD capability and all-electric driving. That motivation will power a body expected to go heavy on carbon fiber, active aerodynamics, and the wind-cheating prowess gained from partner Red Bull Racing and aerodynamicist Adrian Newey. After iterating through 12 scale models and three full-sized mock-ups so far, the creative honcho said the final car will "be the most beautiful mid-engined car on the road." The coming Vanquish will be car number five of Aston Martin's Second Century plan, aiming to deliver seven cars in seven years. The Aston Martin SUV will be the fourth when it enters production late next year, after the DB11, Vantage, and DBS Superleggera. The mid-engined screamer follows in 2020. Related Video:

Aston Martin SUV production to start in late 2019

Aston Martin has confirmed it's upcoming SUV will begin production at a new factory beginning in late-2019. The high end sport-utility will be similar in size and design to the DBX Concept, which Aston Martin first exhibited in Monterey back in 2015. Since it first debuted three years, the market for exotic and hugely expensive sport-utilities has gotten red-hot and highly competitive. New models in this rarefied segment of the sport-utility world now include the Lamborghini Urus, Rolls-Royce Cullinan, and Bentley Bentayga. The plant where Aston will build its SUV is based in St. Athan, Wales, on the site of a former Royal Air Force base. A total of three former aircraft hangars are being combined, to create this new facility. This factory is only part of a larger expansion plan that will add roughly 1,000 new employees to Aston Martin's ranks, stationed throughout its existing facilities in Gaydon and Newport Pagnell, along with the new St. Athan-based site. "We are delighted at the progress being made at the St Athan site. The team have done a fantastic job in advancing the facility and I was incredibly proud to chair our first Board meeting at the new plant," said Andy Palmer, Aston Martin's president and CEO. Showing how important adding a truck is to its future business model, Aston confirmed a total of 150 employees will be assigned solely to "pre-production preparations" related to the company's upcoming SUV. Related Video:

Aston Martin Vantage with a manual transmission due next year

In 2016, Aston Martin CEO Andy Palmer told Car and Driver that that Aston Martin would continue to offer manual transmissions and will always have at least one hand-shaker in the lineup. For the keepers of the dying manual light, it's been a long wait since the V12 Vantage S went out of production last year, but dawn will break over Gaydon in summer 2019. Aston Martin chief engineer Matt Becker told Road & Track at the Goodwood Festival of Speed that there'd be a stick shift in the V8 Vantage by "this time next year." That might seem like a long wait when there are already prototypes on the road, but the small company has a large engineering job. The Mercedes-AMG 4.0-liter twin-turbo V8 sitting in the Vantage's engine bay has never been paired with a manual gearbox, so Aston Martin has to create the software and the driveline hardware from scratch to make it work. On top of that, the company wants to make sure the package delivers the thrills the row-your-own crowd seeks. Becker said the car won't be a pushover, tuned so that "It reminds you that you have to know how to drive." Depending on uptake, one could hope that the DB11 using the same Mercedes-AMG engine would also undergo a manual transformation. Road & Track didn't get the details on what kind of transmission we could expect. We figure the options are a traditional six-speed, a Corvette-style seven-speed, a Porsche-style seven-speed, or the dogleg seven-speed used last in this year's V12 Vantage V600, of which there were only 14 units. Speculation on product plans puts the manual transmission first in the V8 Vantage pipeline, followed by a Vantage roadster and a V12 Vantage. Other models will certainly fill out the portfolio, Becker saying this first Vantage "is the starting point." Having applied the hardcore AMR moniker to the Valkyrie AMR Pro, DB11 AMR, and Rapide AMR, the Vantage seems a lock for the same extreme makeover. Related Video:

James Bond's ‘GoldenEye’ Aston Martin DB5 sells for $2.6 million

Last month, we wrote about the "GoldenEye" Aston Martin DB5 coming up for auction at the Goodwood Festival of Speed, and reported that it was estimated to bring in $1.6 million to $2.14 million. The Aston did a lot better, as it ended up selling for a comfortable $2.6 million. The cinematic Aston's buyer turned out to be the newly founded NYC spy museum Spyscape, which is already displaying the DB5 deal on its website. As a matter of fact, Spyscape will even be offering rides in the DB5 — not a lot of people have ridden in any DB5, let alone one that has been driven by James Bond. As Hemmings notes, the DB5 in question was found for filming by Aston Martin itself along with a couple other examples. After filming wrapped up, it was restored — reportedly to address damage accumulated during the shoot — and put on a promotional tour. Stirling Moss himself drove the car onstage at the Los Angeles Auto Show, when the spiritual successor for the DB5, the DB7, was presented. It's worth noting that the car sold in 2001 for $200,000, and that it was the most expensive piece of Bond-related stuff sold at the time. Last weekend's auction price puts a zero at the end of that price, and then some. Meanwhile, if you can't afford a $2.6 million James Bond car, how about the just-out Lego kit costing $149.99? Related Video: TV/Movies Aston Martin Auctions Luxury Classics aston martin db5 db5

‘Goldfinger’ Aston Martin DB5 Lego kit has fully functioning gadgets

Just as we predicted, Lego's James Bond-themed Aston Martin model kit is of the 1964 Aston Martin DB5 from "Goldfinger." A car that also featured prominently in other Bond films including " Casino Royale," "Skyfall" and " GoldenEye," among others. ( The real "GoldenEye" movie car just sold for a cool $2.6 million.) And while at first blush, it seems that the Aston's effortless class didn't quite translate as well to brick form as boxier vehicles such as the VW Bus and the Mini Cooper, we can easily forgive it. Why? Because it has all of the gadgets from the movie, and they all work! Working from the nose of the car, the turn signals drop out of the way to reveal the machine gun barrels. These disappear at the pull of the shift lever in the interior. Also in the interior are the hideaway tracking computer in the dash and the door-mounted car phone. Of course the best feature inside is the ejector seat. Pull on the rear bumper, and the roof lifts off and other mechanical bits fling the seat through the opening. Behind the rear window, there's the bulletproof shield that can be raised into position. Finally, all four wheels can have the tire cutters fitted, and the license plates swivel for different numbers. And for car enthusiasts, Lego has made sure that the model is simply a nice and accurate replica of a DB5. The hood is hinged at the front, and underneath is a detailed model of the car's double-overhead cam straight-six. It's modeled down to the triple carburetors. The doors open, naturally, as does the trunk, which has quite a bit of space. The Lego kit goes on sale Aug. 1 for $149.99. It consists of 1,290 pieces, and the finished model measures out to about 13 inches in length. Related Video: Featured Gallery Aston Martin DB5 Goldfinger Lego Kit View 41 Photos Image Credit: Lego Toys/Games TV/Movies Aston Martin Coupe Classics Lego aston martin db5

Even Aston Martin and Rolls-Royce have designed flying taxis

Think British-built taxi cabs and you're likely to think of the classic, black London taxis. However, there are British companies eager to take taxis to the skies — bearing vaunted nameplates. Aston Martin has created the Volante Vision Concept, which isn't a sports car, but a luxury VTOL aircraft. It is the product of a joint venture with Cranfield University, Cranfield Aerospace Solutions and Rolls-Royce, and Aston says it's a "near-future study" that previews a flying autonomous hybrid-electric vehicle. It's meant for both urban and inter-city travel. The hybrid powertrain would come courtesy of Rolls-Royce Electrical, which has already provided such systems for marine and train use. The Volante Vision Concept's design language has been overseen by Marek Reichman, who stated the following: "We are at the beginning of a new generation of urban transportation; vertical mobility is no longer a fantasy. We have a unique chance to create a luxury concept aircraft that will represent the ultimate fusion of art and technology. We have used forms and proportions that express the same devotion to design, engineering and beauty that shape our cars." The leather interior bears familiar, winged Aston Martin badging — though this time the wings are especially appropriate. Beyond working with Aston Martin, Rolls-Royce plc has also designed a flying taxi of its own. Similarly VTOL, Rolls-Royce's hybrid-electric taxi has rotating wings and uses a gas turbine engine paired to hybrid tech; it is designed to carry four or five passengers and offers a 500-mile range with a top speed of 250 mph. And Rolls, of course, as a major supplier of aircraft engines, knows a thing or two about flying. Rolls says that if there is a business case for the flying taxi, it could see production in the early-to-mid-2020s. The Rolls-Royce concept was presented Monday at the Farnborough Air Show. Related Video: Featured Gallery Aston Martin / Rolls-Royce Flying Taxis Image Credit: Aston Martin, Rolls-Royce plc Design/Style Aston Martin Rolls-Royce Technology Emerging Technologies Autonomous Vehicles Commercial Vehicles Future Vehicles Luxury Special and Limited Editions air taxi

Q by Aston Martin makes a 430-hp V8-powered Cygnet

A V8-powered Aston Martin Cygnet with 430 horsepower and 361 pound-feet of torque could be the best definition of "Didn't see that coming" we've had all year. A customer requested the carmaker's customization arm, Q by Aston Martin — Commission, insert a 4.7-liter V8 from the last-gen Vantage S into the Cygnet's engine bay. The grafting job, dressed in Buckinghamshire Green, weighs 1,375 kilograms or 3,025 pounds with fluids, and posts a power-to-weight ratio of 284 hp-per-ton in U.S. parlance, 313 bhp/tonne in UK units. Aston Martin engineers shortened the intake system to keep the Cygnet's standard hood unmolested. The motor blows out the other end through a twin, centrally-mounted exhaust at the end of very short pipes. Other components carried over from the Vantage S include the front and rear subframes, suspension, most of the braking system, and seven-speed Sportshift II transmission. Torque steer isn't an issue, because the rears do the driving via a "miniature" torque tube that runs underneath a custom tunnel. Carbon wheel arches shield 19-inch wheels shod in 275/35 Bridgestone rubber, with six-piston monoblock calipers in front, four-piston monoblocks in back. In spite of Aston Martin calling this "The Ultimate City Car," additional modifications would indicate the owner has ultimate track plans for the V8 Cygnet. The Q department welded in a roll cage, occupants sit in fixed Recaro buckets with four-point harnesses, the driver grips a removable, Alcantara-covered steering wheel, there are leather pull straps on carbon door panels, a steel fuel tank fills the cargo area, and an FIA-compliant fire extinguisher system keeps things cool if the temperature gets too hot. Should the V8 Cygnet pretend to its city car origins, there's a Vantage instrument cluster, air conditioning, and two USB ports. Goodwood Festival of Speed visitors will get to see how she runs up the hill. The original Cygnet, based on the Scion iQ and out of production since 2013, got from 0-60 miles per hour in about 11 seconds. The V8 Cygnet does that in 4.2, and taps out at 170 mph — 60 mph past the standard Cygnet's top speed. Aston Martin says the original Cygnet "looks set to become a future classic." That could be optimistic. The V8 Cygnet, however, just might have the chops. Related Video: Featured Gallery Aston Martin V8 Cygnet View 12 Photos Aston Martin Hatchback Luxury Racing Vehicles Special and Limited Editions aston martin cygnet q by aston martin

James Bond Aston Martin Lego kit coming soon from Denmark with love

It's a good time to be a Lego fan and a car enthusiast. We've got little Speed Champions models of Le Mans race cars and classic sports cars, and intricate big models ranging from the VW Beetle to the Bugatti Chiron. The streak continues soon with a new kit announced by Aston Martin's Twitter page. Apparently Lego will be making a kit based on a car from one of the James Bond films. It's been 'driving' us wild with excitement and now we're nearly ready to reveal this powerful creation! #LicenceToBuild pic.twitter.com/KYHiHxlcR0 — Aston Martin (@astonmartin) July 3, 2018 The thing is, the cover art doesn't actually show what car will be used. There are quite a few Astons to pick from, too. You've got the most recent one, the DB10 from "Spectre." Then of course the DBS from " Casino Royale" and " Quantum of Solace." Oh, and how could anyone forget the missile-launching, active-camouflaging Vanquish from "Die Another Day"? View 61 Photos If we're being honest, though, there's only one Aston Martin that is truly exemplary of Bond, and that's the DB5 from "Goldfinger." It's timelessly cool, has all the gadgets, and keeps reappearing in more recent Bond films. As such, there would be no better place to start for a Lego James Bond car kit. And, since the kit will be a Creator Expert series model, we can imagine it having functioning gadgets such as the revolving license plates and the ejector seat. Man, this kit could be so cool. Hopefully we don't have to wait long to see all the details. Related Video: Image Credit: Aston Martin, RM Sotheby's Toys/Games TV/Movies Aston Martin Coupe Performance Classics Lego

Aston Martin Valkyrie could beat that new Nurburgring record, Red Bull F1 boss says

During last weekend's Austrian Formula 1 Grand Prix, Race Fans asked Red Bull F1 team principal Christian Horner about the Aston Martin Valkyrie. The question was whether the coming hypercar, a collaboration between Red Bull and title sponsor Aston Martin, could beat the stunning lap record around the Nurburgring just set by the Porsche 919 Hybrid Evo. Horner's answer: "I'm not sure a Formula 1 car could actually do it, but I think that the Valkyrie — certainly the track version of the Valkyrie — could be a contender." That's a qualified endorsement, but it still counts as support merely putting the Valkyrie AMR Pro in the conversation. Let's compare, shall we? The 919 Hybrid Evo is based on the 2017 World Endurance Championship-winning 919 Hybrid. Freed from motorsport regulations, Porsche Motorsport upgraded numerous performance bits. The 2.0-liter, turbocharged V-four-cylinder went from 500 hp to 720 hp. The two KERS units went from 400 hp to 440 hp. We don't have a figure for downforce, but items like active aero, a larger front diffuser, optimized turning vanes, and larger rear wing increased downforce by 53 percent over the WEC car, at the same time being 66 percent more aero efficient. It weighs 849 kg dry, or 1,868 pounds because Porsche threw out everything that didn't contribute to speed. The Valkyrie specs we know of so far state a weight of 1,000 kilograms, or 2,200 pounds. Powering that is a custom, naturally aspirated, 6.5-liter AMR Cosworth V12 with more than 900 horsepower, augmented by a kinetic energy recovery system contributing around 230 hp. According to Autocar's sources, the Valkyrie could generate up to 4,000 pounds of downforce at an aerodynamically-limited 225 miles per hour. That boggling number comes courtesy of Adrian Newey's prowess at making changes such as openings between the front wheel arches and the cockpit that work the front wing harder. The two-seater coupe's unrestricted top speed is 254 mph. Note, though, that the Valkyrie AMR Pro will be more powerful, lighter, and could have even more downforce. And since Aston Martin and Newey continue to work on the hypercar, specs could get even better before deliveries begin. Right now, Horner's suggestion doesn't seem all that outrageous. We'll also wait to see if the Mercedes-AMG Project One pokes its nose in the ring, too. Not long ago, AMG chief Tobias Moers said it's "reasonable to speculate" the F1-inspired hypercar could claim an absolute lap record around the 'Ring.

Aston Martin revives two iconic names for its new DBS Superleggera

Progress has finally swept away the Vanquish S, with its non-turbo V12 and old-style Aston Martin chassis, and its replacement signals the new way of doing things. The new DBS Superleggera is twin-turbocharged and adopts a variant of the chassis and a whiff of the styling of the newer DB11. That styling is rendered in carbon fiber, incorporating such new-style features as the "curlicue" and the Aeroblade to improve downforce to 397 pounds at its top speed of 211 MPH. And some familiar elements show up in the overall styling, too, like the semi-floating roof and the fender vent that blends into the front wheel opening. The massive, gaping grille is more reminiscent of the Vantage than the DB11, although on the DBS Superleggera it has a more classic Aston Martin shape and treatment – but perhaps the grille takes up too much of the frontal area to be considered pretty rather than simply bold. Overall, the look is DB11 plus luxury and opulence, which is exactly the point. Speaking of opulence, the interior is an almost scandalous blend of premium materials and bold shapes. There's a lot of leather and alcantara – the car shown in these photos has accent panels of chopped carbon fiber and charcoal-colored leather with bold red accent stitching. There's more exposed carbon fiber, albeit woven, accenting the exterior in various places. It's not subtle or particularly classic, but write a big enough check to Aston and they'll surely trim your DBS Superleggera in any fashion you want. There is also a range of Designer Specifications, which are specific color and trim combinations picked out by the company's designers, in case you want to leverage in-house talent to deck out your DBS. Performance is suitably commanding. The DBS Superleggera now makes 715 horsepower and 664 pound-feet of torque. Thanks to turbocharging, that torque figure is available from 1,800 to 5,500 RPM, although the corollary is that peak power is at 6,500 RPM. It's rear-drive only, assisted by an eight-speed auto and a mechanical limited slip differential with torque vectoring. 0-62 mph takes 3.4 seconds according to the factory, but the more important number is the 0-100 MPH time of 6.4 seconds, and fourth-gear acceleration of 50-100 MPH in just 4.2 seconds. This is the power of turbocharging a large-displacement engine – it's a 5.2-liter unit. The DBS Superleggera starts at $304,995, and deliveries begin later this year.