1989 Black Alfa Romeo Quadrofoglio Convertible on 2040-cars

Auto blog

Alfa Romeo 4C priced at $53,900* in US, gains 342 pounds vs Euro version

We're out in California driving the Alfa Romeo 4C as we write this – which is the good news. The bad news is that we can't offer up any driving impressions of the car for another few days. On the other hand, we can provide a few interesting non-driving-based tidbits from the launch program, with which to further enlighten you about Alfa's upcoming "compact supercar" (that descriptor comes direct from Alfa CEO Harald Wester, for what it's worth). So, for starters, the price. When Matt Davis drove the European-spec 4C in the fall of last year, he guestimated that the starting price for the US would hover around $55,000. As it turns out, that was a pretty good guess. Eventually, the starting bill on a 4C will be $53,900, plus a significant $1,295 for destination, netting out to $55,195 out the door. That price might sound inline with what you'd expect for an Italian quasi-supercar, but it's not likely what you'll actually pay if you buy one. We're told that $62k to $65k will be the sweet spot for 4C sales in the US. What's more, if you simply have to have a 2015 model, you'll have to pony up a healthy $69,695 (that's including destination), for one of just 500 examples of the launch edition that will be sold here this year. In addition to a serialized plaque that will certify your historic purchase, the launch edition cars get the larger optional wheels in a dark-finish, the sport suspension, sport exhaust, and some other bits and bobs. Finally, while we're happy to report that the curb weight of the feather-light 4C will stay below the magical 2,500-pound mark (2,495 lbs., wet), it has still gained some 342 pounds versus the European-spec car. The added weight is down to a beefier carbon-fiber tub and additional US safety equipment. It's also fair to mention that the ultra-light European model was arrived upon thanks to a homologation rule with the EU, that (among other things) will limit 4C sales on the continent to just 1,000 units per year. We'd expect that to evolve as the model stays on sale. Stay tuned for our full review of the car, thick carbon-fiber and all, early next week.

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Are supercars becoming less special?

There's little doubt that we are currently enjoying the golden age of automotive performance. Dozens of different models on sale today make over 500 horsepower, and seven boast output in excess of 700 hp. Not long ago, that kind of capability was exclusive to supercars – vehicles whose rarity, performance focus, and requisite expense made them aspirational objects of desire to us mortals. But more than that, supercars have historically offered a unique driving experience, one which was bespoke to a particular model and could not be replicated elsewhere. But in recent years, even the low-volume players have been forced to find the efficiencies and economies of scale that formerly hadn't been a concern for them, and in turn the concept of the supercar as a unique entity unto itself is fading fast. The blame doesn't fall on one particular manufacturer nor a specific production technique. Instead, it's a confluence of different factors that are chipping away at the distinction of these vehicles. It's not all bad news – Lamborghini's platform sharing with Audi for the Gallardo and the R8 yielded a raging bull that was more reliable and easier to live with on a day-to-day basis, and as a result it went on to become the best-selling Lambo in the company's history. But it also came at the cost of some of the Italian's exclusivity when eerily familiar sights and sounds suddenly became available wearing an Audi badge. Even low-volume players have been forced to find economies of scale. Much of this comes out of necessity, of course. Aston Martin's recent deal with Mercedes-AMG points toward German hardware going under the hood and into the cabin of the upcoming DB11, and it's safe to assume that this was not a decision made lightly by the Brits, as the brand has built a reputation for the bespoke craftsmanship of its vehicles. There's little doubt that the DB11 will be a fine automobile, but the move does jeopardize some of the characteristic "specialness" that Astons are known for. Yet the world is certainly better off with new Aston Martins spliced with DNA from Mercedes-AMG rather than no new Astons at all, and the costs of developing cutting-edge drivetrains and user interfaces is a burden that's becoming increasingly difficult for smaller manufacturers to bear. Even Ferrari is poised to make some dramatic changes in the way it designs cars.