2012 Acura Tl on 2040-cars

Auto blog

4.5 million Hondas, Acuras are being recalled worldwide to fix a fuel pump defect

Honda is recalling more than 4.5 million cars worldwide because of a fuel pump problem that could lead to engine failure or stalling in traffic, which could cause an accident. The recall includes 2.54 million vehicles in the United States. The automaker had previously recalled 628,000 U.S. vehicles in 2021 and 136,000 in 2020 for the same issue. Honda issued recalls over the same issue earlier this month in China and Japan. National Highway Traffic Safety Administration recall documents say the impellers inside fuel pumps of 2017-2020 Hondas and Acuras were improperly made, meaning they “can deform and interfere with the fuel pump body” over time. This could prevent the engine from starting, or can cause a stall while driving, which depending on the situation in traffic, could be dangerous. Fortunately, Honda says it hasn't received any reports of crashes or injuries. To remedy the problem, Honda will replace the in-tank fuel pumps, at no cost to owners, in the entire U.S. recall population of 2,539,902 vehicles, though the defect may be present in only 1 percent of those cars. Because of the size of the recall, repairs will be done in phases, with first owners receiving notification letters in February. Dealer notifications began this week. “Countermeasure replacement parts are not available in sufficient quantities for all recalled vehicles at the time of this announcement, and American Honda intends to notify vehicle owners in stages," Honda wrote. Meanwhile, owners wishing to confirm that their vehicle is included can enter their VIN at the NHTSA recall site or at American Honda's and Acura's recall platforms.  NHTSA's campaign number for the recall is 23V858000. Honda's numbers for this recall are KGC and KGD. Owners may also contact Honda customer service by phone: 1-888-234-2138.

Precision Concept previews the future of Acura design [w/video]

When we drove the 2014 Acura RLX Sport Hybrid two years ago we celebrated its massive handling and carped on its milquetoast styling. We'd have done backflips if the internals of the brand's flagship sedan had been wrapped in the sheetmetal of the Acura Precision Concept. Don't get us wrong, we still have some questions about the front end of the car in these images, but we're all-in on the side view and, more importantly, we applaud Acura for making a bold design statement. Acura says the Precision concept "literally will shape the direction of all future Acura products," bringing a "bolder, more distinctive future for Acura vehicle design." Hallelujah. As if you couldn't tell, this is the product of the Acura Design Studio in California, where Acura NSX veteran Michelle Christensen led the exterior work and NSX veteran John Norman led the interior design. Up front is what's called a Diamond Pentagon grille, which looks fussy here but we won't make final judgments until we see it on the Detroit Auto Show floor later today. Come around to the side and the low-slung, rear-wheel-drive proportions on 22-inch wheels are the last thing we'd expect from a design study for an Acura sedan. It is about two inches shorter than the 2016 BMW 750i with a wheelbase that is 4.4 inches shorter, and sits six inches lower. Intensely sculpted surfaces flow from the exterior into the cabin, like the CHMSL that breaks the rear backlight to roll into the rear headrests. Interior elements thrust like geologic formations, popping with mixed materials, floating rear seats, a small steering wheel and floating gauge locked onto a tiered instrument panel. The wide, curved screen atop the center console experiments with a floating touchpad to control a concept human-machine interface. Acura says everything about the Precision concept is an expression of the company's "Precision Crafted Performance DNA." We have no idea how Acura plans to integrate this into its product line; put the Precision on a showroom floor right now and every other current Acura model save the NSX would squeal away and hide. But we welcome the attempt. We can't wait to see what happens. Acura Precision Concept Points to Bold Future for Acura Design DETROIT, January 12, 2016 – The Acura Precision Concept model made its world debut at the 2016 North American International Auto Show today, pointing toward a bolder, more distinctive future for Acura vehicle design.

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.