911/996 Awd Twin Turbo 6 Spd Manual Sunroof Carbon Fiber Options on 2040-cars

Auto blog

Meet the main man behind the 2014 Porsche 911 GT3

We have yet to catch our breath from our first drive of the 2014 Porsche 911 GT3, but if you're still not sold on the fact that this track-ready 911 is only offered with a PDK transmission, then you should take it up with Andreas Preuninger. Preuninger is the guy who led the team responsible for the latest GT3. Porsche has released a video giving a little backstory of what went into the development of the car, which had as its goal the creation of a pure, rewarding 911 driving experience.
The video captures the sights and sounds of the GT3 perfectly. Perhaps the best part is listening to Preuninger describe one of the defining moments that resulted in replacing the GT3's manual gearbox with the PDK. We don't want to ruin the video for you, so scroll down to check it out for yourself.

New Porsche 4-cyl engines to range from 1.6L to 2.5L

Recent rumors of a turbocharged, flat-four-engine from Porsche for the Boxster (pictured testing above), Cayman and maybe other models go back over a year. The latest scuttlebutt indicates that there could be three variants on the horizon with 1.6-, 2.0- and 2.5-liter displacements and power as high as 360 horsepower.
Car magazine in the UK claims to have access to the specifications for the project and thinks the 2.0- and 2.5-liter versions are guaranteed for production for the Boxster and Cayman. However, it believes a question mark still looms over the 210-hp 1.6L because the engine would go into a new, smaller sports car that still doesn't have a green light for production.
Regardless of displacement, the new fours would be turbocharged and direct-injected. The 2.0-liter would produce around 286 hp and 295 pound-feet of torque, and the 2.5-liter would make about 360 hp and 347 lb-ft. Earlier reports pegged some parts sharing with the current flat-six.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.