1960 Porsche 356b - ****1 Mechanic & 2nd Owner ***** on 2040-cars

Auto blog

Porsche reportedly working on new turbocharged flat-four boxer engine?

These days, we've seen just about every automaker dropping cylinders in an effort to appease tightening fuel economy and emission standards - and Porsche is no exception. Nearly three years after introducing an all-new V6 powerplant under the front hood of its Panamera sedan (launched with a range of V8 engines) comes word that Porsche is working on an all-new turbocharged flat-four boxer to replace the flat-six engines mid-mounted in its Cayman and Boxster models.
Specifics have yet to be learned, but reports say the engine is a derivative of the current 3.8-liter six (shown above) found under the rear decklid of the Carrera S, yet with two fewer cylinders. Fitted with a turbocharger, direct-injection and the automaker's VarioCam Plus, the new all-aluminum 2.5-liter flat-four will likely develop upwards of 350 horsepower and 360 pound-feet of torque. Redline should be about 7,500 rpm. Initial indications say that Porsche will only offer the new engine with its seven-speed PDK dual-clutch automatic, tuned to take advantage of the low-end torque, but a traditional six-speed manual gearbox has not been ruled out. Despite the loss of two cylinders, enthusiasts will likely embrace the new engine as it promises to be lighter, more fuel efficient and more powerful than the 2.7-liter and 3.4-liter sixes in the Cayman/Boxster today.
Even though Porsche has been using Volkswagen Group engines for years (e.g., Cayenne V6, Cayenne Diesel and upcoming Macan), all indications are that the new flat-four will not be shared. Instead, it will be kept in-house for the automaker's sports cars and possible future fitment in an entry-level 911.

Evo pits BMW M3 against Porsche Macan in drag battle

If you want to move five passengers in very rapid fashion and you've got a $75,000 budget, two newly introduced four-door models immediately come to mind - both are the highest performing vehicles in their respective segments. But which is faster off the line, to the 60-mile-per-hour benchmark or flat-out over an even longer run? Evo took both to paved aircraft runway to find out.
In lane one we've got the all-new Porsche Macan Turbo, which boasts a twin-turbocharged, 3.6-liter V6 rated at 400 horsepower and 406 pound-feet of torque. The Porsche is fitted with a seven-speed, dual-clutch gearbox, and the 4,244-pound crossover has the traction advantage of standard all-wheel drive. In lane two is the all-new BMW M3, powered by a twin-turbo 3.0-liter inline-six rated at 425 horsepower and 406 pound-feet of torque. It is also equipped with a seven-speed, dual-clutch gearbox, but only the rear wheels of the 3,595-pound sedan are driven. Both the BMW and Porsche arrive with launch control, which helps to remove driver error off the line.
Which automaker's launch control system is better off the line? Does all-wheel-drive grip give the crossover the advantage it needs to overcome its adversary's power-to-weight advantage? Will aerodynamics factor into the results? Which would you put in your garage, and why? The video may surprise you.

Porsche continues facelift spree with 911 Turbo

If there's ever been automotive case for constant evolution, it is the Porsche 911. It seems like every time a new version of the rear-engined sports car debuts, Porsche is already hard at work on a facelifted version of it that changes some subtle, barely noticeable aspect.
Such is the case with this round of images of a facelifted 911 Turbo, which was seen undergoing winter testing alongside the facelifted, hardtop-version of the 911 Cabriolet we showed you yesterday. The new, 991-based 911 Turbo was just unveiled in May of 2013.
Like the Cabrio from yesterday, both the Turbo and naturally aspirated models shown here feature additional slats at the rear of the car, right behind the rear wheels. These slats on the standard model lend credence to what we learned yesterday - that even the regular 911 models could end up getting turbocharged mills.