2006 Ford F-250 Super Duty Lariat Crew Cab Pickup 4-door 6.0l on 2040-cars

Auto blog

Ford Fusion production scaled back just 3 months after it was accelerated

Three months after kicking off production of the Ford Fusion at its Flat Rock, MI factory, Ford Motor Company is taking steps to trim output in the face of heavily discounted competition from Toyota and a growing supply of vehicles.
The addition of Fusion production in Flat Rock - which also builds the Mustang - was meant to be what pushed the handsome mid-sizer past its arch-nemesis, the Toyota Camry. An extra facility building Fusions was also meant to curb the growing demand for Ford's highly profitable sedan.
But with word that Flat Rock would take "approximately" one extra week off for the holidays combined with an 88-day supply of Fusions - reportedly due in no small part to what Morgan Stanley analyst Adam Jonas called "aggressive discounting of the Camry" - some analysts are now beginning to wonder if Ford may have overextended itself by adding a second Fusion facility to the mix.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

2015 Ford Focus ST gets sleeker style, improved dynamics

The Brits don't really have a major auto show these days. Not in a conventional sense, anyway, with stationary vehicles under floodlights in a closed exposition space. What they do have, you could argue, is much better: the Goodwood Festival of Speed, where the public can view the latest machinery not only under an open sky, but in motion as well, speeding up Lord March's front lawn. And this year, British automakers are rolling in with some very enticing new metal.
In the past few days alone we've confirmed the McLaren 650S GT3 and MSO, Jaguar F-Type Project 7, Range Rover Sport SVR and Ariel Ace will all be revealed for the first time at Goodwood this weekend. Ford isn't, strictly speaking, a British automaker, but for all its history in the UK, it might as well. So it's chosen Goodwood as the site to unveil its refreshed Focus ST.
The upgraded Blue Oval hot hatch still packs a 2.0-liter turbo four with 252 horsepower and 270 pound-feet of torque driving through a six-speed manual to the front wheels, so we're not expecting much change in measurable performance. But Ford has given the new Focus ST a new front suspension setup and a new electric power-assisted steering rack that combine to promise improved handling.