1990 Ford E-150 Wheelchair Van on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Ford adds third shift at F-150 plant to keep up with demand

The signs have been very positive for Ford's F-Series line of pickup trucks as of late, and after 24 consecutive months of increasing sales of the best-selling F-150, the automaker has added a third production crew at its Kansas City Assembly Plant that includes 900 new hourly workers to meet demand for the truck. This the first step in Ford's plan to add 2,000 hourly jobs at the plant to help meet demand for its trucks and to begin production of the new Transit van, the automaker says.
Despite some tough new competition, sales of the F-Series are the strongest they've been since 2006, according to Ford. The automaker sold 60,449 F-Series in July, the best sales figure for the mid-summer month since 2006, which also represents a 23 percent increase compared to July 2012. From January to July 2013, sales were up 22 percent compared to the same period last year.
Ford has committed to creating 12,000 hourly jobs by 2015, and with the 900 new employees added to the assembly plant in Missouri, the company says it has completed 75 percent of its goal. Ford has also invested $1.1 billion to retool and expand the Kansas City Assembly Plant to ready it for Transit production. Take a look at the press release below for more job and F-Series sales information.