California Survivor Dodge Super Bee With Under 72000 Miles - New Interior & More on 2040-cars

Auto blog

Motorweek goes retro with '80s hot hatch shootout

Motorweek's decades of history on television make it the perfect medium to look back into the automotive past and see how things are different now. It recently added old road test videos to its YouTube channel of the Acura NSX and Toyota Supra, as well as the Ferrari F40. For one of its newest flashback clips, Motorweek has exhumed an affordable five-car challenge of 1986's premiere hot hatches.
By today's standards, this is an eclectic field that features fondly remembered classics like the Volkswagen GTI 16-valve and Acura Integra. However, it also throws in some nearly forgotten contenders like the Dodge Colt Turbo and Ford Escort GT. The angular Toyota Corolla FX16 GT-S rounds out the group.
It's fascinating to watch Motorweek run the quintet through the slalom, down the drag strip and on various roads. What's most striking in this clip is the difference in the definition of a performance car between then and now. With its 16-valve, 1.8-liter four-cylinder, the GTI is the burliest of the contenders with 123 horsepower, but it still takes 8.8 seconds to reach 60 miles per hour. By today's standards, that would make it a plain-jane economy car, and not even a particularly quick one.

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.