750i Activehybrid 7 Series Low Miles 4 Dr Sedan Automatic 4.4l 8 Cyl Black Sapph on 2040-cars

Auto blog

Alpina D3 may be coming to Frankfurt with 350 hp, AWD

Rumors are swirling that Alpina, the tuning house that specializes in all things BMW, will followup its Geneva debut of the B3 Bi-Turbo with an oil-burning variant slated for debut at September's Frankfurt Motor Show. The news comes from Auto Zeitung, which reports that the second-generation D3 will be based off the Europe-only 335d.
This is a departure from the last D3, which had the four-cylinder turbo-diesel from the BMW 123d in a 3 Series body. The new model is expected to use a 3.0-liter, twin-turbocharged inline-six, which will generate 350 horsepower and 516 pound-feet of torque. That should scoot it to 62 miles per hour in under five seconds (likely while towing a tree stump). Both rear- and all-wheel drive should be available on the D3, and we imagine the thrill of this much power channeled through just the two rear wheels to be akin to skydiving sans parachute.
For our European friends that want an Alpina D3, but don't need more torque than any American full-size pickup, there may be plans to offer a four-cylinder variant that still delivers Alpina performance without a compromise in economy. We'll have more on the Alpina D3 when it debuts at the 2013 Frankfurt Motor Show.

2015 BMW 2 Series Cabriolet flips its lid [w/video]

Early next year, BMW will offer droptop versions of its entry-level 2 Series. Available in both 228i and M235i guise, the 2 Series Cabriolet will no doubt take everything we already like (and don't like) about the Twoer and add that wind-in-your-hair experience. Of course, taking in all the extra sun comes at a price - $37,900 for the 228i and $47,700 for the M235i, not including $950 for destination. Those prices represent increases of $5,800 and $4,600, respectively.
Powertrain specs are identical to the coupes, with the 228i powered by a 2.0-liter turbocharged inline-four good for 240 horsepower and 255 pound-feet of torque. The more potent M235i gets BMW's turbocharged, 3.0-liter inline-six, with 320 hp and 330 lb-ft of push, and can hit 60 miles per hour in 4.8 seconds. That's with the eight-speed automatic transmission, which is available with either engine. And for those who prefer to row their own, BMW will thankfully offer a six-speed manual gearbox with both powerplants, as well.
Following the Paris Motor Show unveiling, the pair will be shown in the US at the Los Angeles Auto Show in November before hitting dealers a few months later. Have a look at the new droptop in our fresh batch of images live from the Porte de Versailles exhibition center, and read BMW's lengthy press blast, below, for all of the official information.

BMW X4 reclaims dash of utility with Clemson student project [w/videos]

BMW seems willing to exploit every automotive niche it can find with creations like the four-door, 'crossover coupe' X4 and X6. Of course, these designs come with a compromise. That svelte fastback means that they just can't haul as much cargo as a more traditional, boxier hatchback. Fortunately, students at Clemson University's International Center for Automotive Research might have a novel solution: the engineering graduate program has turned the crossover into a unique pickup.
Dubbed Deep Orange 4 concept, this functional prototype has an enclosed cargo area with a sliding glass panel that opens up to expose a pickup bed if more room is needed. Think of it as the GMC Envoy XUV of German crossovers. This isn't just an X4 with its roof hacked off, though. The students actually started with an X3 and grafted on this top later in addition to the two barn doors for access to the bed.
To make this project even more impressive, this pickup-crossover could conceivably be produced. The graduate students conducted an in-plant analysis of BMW's manufacturing abilities and went back to the university to create a plan for a low-volume vehicle that could actually be built. "The students working on this phase of the project did an excellent job of keeping costs down while finding optimal integration opportunities," said Rich Morris, vice president of assembly at BMW Manufacturing, in the university's release.