Volvo Xc 90 No Reserve Fwd Leather Moon 3rd Row Seats No Accidents Clean Carfax on 2040-cars

Auto blog

Last Volvo XC90 rolls off assembly line in Gothenburg

It was back in 1998 when Volvo set about developing its first SUV. The brief was to build a seven-seater that wasn't "too large", and several design proposals were considered. Three and a half years later Volvo revealed the XC90 at the 2002 Detroit Auto Show and the rest, as they say, is history.
Volvo initially had an eye towards selling 50,000 units per year. It achieved that and then some, selling around 85,000 examples per year between 2004 and 2007. Now, after 12 years and 636,143 examples made - still over that initial target on average despite its lingering age that see it selling just 11,000 units these past few years - the last Volvo XC90 rolled off the assembly line in Gothenburg.
That final example is heading straight to the Volvo Museum adjacent to the factory. But it won't, strictly speaking, be the last XC90. It is the last of that model to be built in Sweden, but a new model is on its way. And the current model will continue to be built in Daqing, China, to be sold locally as the Volvo XC Classic. So if you want to get your hands on a seven-seat Volvo crossover, you'll have to move there. Otherwise you can wait until the end of January 2015 for the new model to begin production.

Volvo's SuperTruck 2 looks ready to extend a ramp for K.I.T.T.

In 2009, the U.S. Department of Energy (DOE) entered a public-private partnership with willing Class 8 truck makers, the goal of the partnership to dramatically improve the freight efficiency of over-the-road (OTR) trucks. The term "freight efficiency" refers to freight-ton efficiency, a different metric than miles per gallon because it takes into account the weight of the truck; a lighter tractor-trailer can carry more weight before reaching the 80,000-pound legal maximum on most U.S. highways. Volvo, Daimler (which owns the Freightliner and Sterling brands), Navistar (International), and Peterbilt signed on the the partnership to develop what's being called a SuperTruck. Volvo, Daimler, and International make their own engines, Peterbilt teamed up with Cummins, and all four found their own trailer manufacturers to work with. Those four makers debuted their first iterations of what's being dubbed SuperTrucks about six years ago. This year has been all about SuperTruck 2, Volvo the last of the quartet to show what it's achieved. The goal for SuperTruck 1 was to achieve a 50% increase in freight efficiency compared to a 2009 baseline, the baseline in Volvo's case being a 2009 VNL 670 tractor. The goal for SuperTruck 2 was another 50% improvement. Volvo said its internal goal was a 120% betterment compared to 2009, and that it exceeded the mark with a 134% increase. The company said the huge gains came primarily from aerodynamics: A wedge-shaped front with a smaller frontal area thanks to a smaller cooling package; the heavily curved, wraparound windshield; the tractor's adjustable ride height; using camera for side mirrors; and adding a boat tail to the back of the trailer, plus enough fairings and skirts front-to-back to make the tractor and trailer look like a single unit when driving in a straight line. Volvo did make changes to its rolling lab that aren't likely to infiltrate the U.S. market anytime soon. It's common for U.S. OTR trucks to use a 6x4 configuration, with two axles behind the cab, both driven. Volvo's SuperTruck 2 went with a 4x2 setup common in Europe, using a single axle behind the cab, and fitted a composite driveshaft. Combined with making the chassis out of aluminum instead of steel, and trailer partner Wabash providing a lightweight aluminum van, the tractor-trailer combo weighed just 27,000 pounds.

Volvo fires up S60 and V60 Polestar production

We were pretty smitten with the Volvo S60 and V60 Polestar models during our First Drive in Sweden a few months ago. We especially loved the way that its Öhlins adjustable dampers offered a perfect balance between suppleness and sporty handling. Now, the rest of the world will finally be getting the chance to take the Polestar models for a spin because Volvo is shipping out the first units of the limited-edition vehicles.
Their completion marks the first time ever that Polestar-tuned models have come off the line at Volvo's Torslanda factory. However, production of the 350-horsepower hatchback and sedan is very limited. Volvo is building a total of just 750 of them for the world market, and the US is only getting 80 wagons and 40 sedans.
In addition to the cutting-edge dampers and more powerful engine, both Polestar models benefit from a rear-biased all-wheel-drive system routed through a six-speed automatic with paddle shifters and launch control. Six-piston Brembo calipers bring things to a halt, and the limited models get unique front and rear fascias and 20-inch wheels. These are two very hot Swedes, and if rumors are right, then there are even more tuned Volvos from Polestar on the way. Scroll down to read the full announcement.