2025 Volvo Xc90 B6 Awd Plus 6-seater on 2040-cars

Auto blog

Volvo S60 Polestar entering limited production in Australia [w/video]

The Volvo S60 Polestar Concept may be entering limited production in Australia and, depending how the Aussies take to this Swedish super sports sedan, could then be made available worldwide. The news comes from Austrlia's GoAuto, which claims to have received early info from its sources inside Volvo and its tuning/motorsport arm, Polestar.
Polestar released a short teaser video this week (watch it below) of what appears to be the S60 Polestar Concept clipping the snowy apex of an ice track's turn. The only information given with the teaser were the words "Limited Edition. Soon in Australia." Unveiled last June, the S60 Polestar concept has since made the rounds at auto shows, visited Jay Leno's Garage, played on the track with its future competition, and even secured a home for itself with a buyer who reportedly is paying Volvo some $300,000 to own it.
The S60 Polestar Concept is about the meanest machine one can imagine making out of Volvo's sports sedan. Packing 508 horsepower and 424 pound-feet of torque from its heavily modified T6 engine, then routing those revolutions through a six-speed manual transmission to all four wheels, the S60 Polestar is said to cover the sprint to 62 miles per hour in 3.9 seconds. A lower and wider body, brakes by Brembo, suspension bits by Ohlins and a diet to delete some weight make this car a serious issue for M3 and C63 AMG owners everywhere. GoAuto's sources say the production version's performance will be dialed back a bit from the concept's, but we'll have to wait until Volvo and Polestar make this sedan's production official to find out by how much.

Junkyard Gem: 1984 Volvo 242 DL

Volvo had tremendous success with the iconic 200 Series cars, selling them in North America from the 1975 model year all the way through 1993 (and if you count the Volvo 140, which was the same car from the A pillars rearward, the 240's history goes back to the middle 1960s). Nearly everybody who bought 240s on our continent did so in order to be safe and/or practical, which meant that the two-door version never sold anywhere near as well as its four-door and wagon brethren. Here's one of those rare 240 coupes (technically speaking, a two-door sedan), found in a San Jose car graveyard last winter. If you're going to be a stickler about the designation of this car as a two-door sedan and not as a coupe, you'll also want to call it by the name Volvo used when it was in the showroom: the 1984 Volvo DL. However, everybody in the Volvo world now prefers the original naming system that Volvo used for the 200s back home in Sweden, where you had 2 followed by a numeral indicating the number of engine cylinders and a numeral indicating the number of doors, with the trim-level code after that. So, what we have for today's Junkyard Gem is a Volvo 242 DL, i.e., the cheapest new 240 Americans could buy in 1984. You could get a turbocharged engine from the factory in the 1984 242, but this car has the ordinary naturally-aspirated 2.3-liter straight-four, rated at 111 horsepower. It also has the four-speed manual transmission with overdrive controlled by the button in the middle of the shift knob. Nearly 230,000 miles on the clock, which is decent for any 1980s car but not spectacular by Volvo 240 standards. Many Volvo enthusiasts prefer the smooth lines of the coupe to the stodgier sedans and wagons, and this one shows signs of ownership by someone who wasn't just about listening to NPR while driving safely to the natural-foods store. Sure enough, it has aftermarket springs and a non-factory rear sway bar. I wish I'd found these parts back in 2007, when I was helping to build a V8-swapped Volvo 244 road racer. The presence of the keys in a junkyard car, however, usually indicates that it was voluntarily let go by its final owner. Perhaps it was a dealership trade-in that proved to be impossible to sell due to a combination of three pedals, high miles, and lack of truck-shaped body. The interior looks like it might have been tolerable before it reached this place.

Can we keep the gauge cluster around, please?

Let’s not follow TeslaÂ’s lead in the elimination of the gauge cluster. I might be too late, but IÂ’m going to say it anyway. The cute 2025 Volvo EX30 is to blame for this needing to be said. I genuinely like most things about the EX30 and its cost-oriented approach to a luxury EV. However, Volvo went and deleted the gauge cluster, and thatÂ’s just one cost-saving step too many. Of course, center-mounted instruments is nothing new, but Tesla popularized the idea of removing the cluster entirely years ago with its Model 3 and Model Y. I didnÂ’t like the idea when I first saw it, and my displeasure with driving around a car with no cluster was confirmed when I drove a Model 3 for the first time. There are numerous reasons, but it all boils down to the importance of having vital information in your direct line of sight. The transition to EVs allows for the elimination of certain monitoring gauges within a cluster, but basics like speed, gear position, headlight status, cruise control and range are all things I want directly in front of me. I donÂ’t want to glance down and to the right to see these things. You could make a valid safety argument for such an arrangement, but including all of that info just for the sake of convenience is enough. The only excuse I see for eliminating the cluster is if a comprehensive head-up display impervious to polarized sunglasses comes as standard equipment. ItÂ’d still be bothersome in a gasoline-powered car to lose all those gauges, but I could live with just a HUD in an electric car if it meant a lower cost to the buyer. That said, my favorite integrations are the smaller clusters installed in some EVs like the Ford Mustang Mach-E or Volkswagen ID.4. These little clusters are smaller and simpler than many of the massive instrument screens going into cars these days, but they include all the information you might want at a glance. Beyond the safety and convenience aspect, thereÂ’s a nostalgic angle to the gauge cluster. Just a short while ago, I trumpeted the return of retro designs in digital gauge clusters. You can quite literally do whatever youÂ’d like when youÂ’re working with a screen, which leaves the field of opportunities wide open. We wonÂ’t have the privilege of enjoying old-school (or revolutionary new-school) designs if OEMs start eliminating them entirely.