2004 Volvo Xc90 T6 Wagon 4-door 2.9l on 2040-cars

Auto blog

Volvo's SuperTruck 2 looks ready to extend a ramp for K.I.T.T.

In 2009, the U.S. Department of Energy (DOE) entered a public-private partnership with willing Class 8 truck makers, the goal of the partnership to dramatically improve the freight efficiency of over-the-road (OTR) trucks. The term "freight efficiency" refers to freight-ton efficiency, a different metric than miles per gallon because it takes into account the weight of the truck; a lighter tractor-trailer can carry more weight before reaching the 80,000-pound legal maximum on most U.S. highways. Volvo, Daimler (which owns the Freightliner and Sterling brands), Navistar (International), and Peterbilt signed on the the partnership to develop what's being called a SuperTruck. Volvo, Daimler, and International make their own engines, Peterbilt teamed up with Cummins, and all four found their own trailer manufacturers to work with. Those four makers debuted their first iterations of what's being dubbed SuperTrucks about six years ago. This year has been all about SuperTruck 2, Volvo the last of the quartet to show what it's achieved. The goal for SuperTruck 1 was to achieve a 50% increase in freight efficiency compared to a 2009 baseline, the baseline in Volvo's case being a 2009 VNL 670 tractor. The goal for SuperTruck 2 was another 50% improvement. Volvo said its internal goal was a 120% betterment compared to 2009, and that it exceeded the mark with a 134% increase. The company said the huge gains came primarily from aerodynamics: A wedge-shaped front with a smaller frontal area thanks to a smaller cooling package; the heavily curved, wraparound windshield; the tractor's adjustable ride height; using camera for side mirrors; and adding a boat tail to the back of the trailer, plus enough fairings and skirts front-to-back to make the tractor and trailer look like a single unit when driving in a straight line. Volvo did make changes to its rolling lab that aren't likely to infiltrate the U.S. market anytime soon. It's common for U.S. OTR trucks to use a 6x4 configuration, with two axles behind the cab, both driven. Volvo's SuperTruck 2 went with a 4x2 setup common in Europe, using a single axle behind the cab, and fitted a composite driveshaft. Combined with making the chassis out of aluminum instead of steel, and trailer partner Wabash providing a lightweight aluminum van, the tractor-trailer combo weighed just 27,000 pounds.

Big rig gets blown over on Wyoming freeway, flattens police cruiser

A big rig navigating a stretch of windy Wyoming highway last week was blown over by high winds and landed on a Wyoming Highway Patrol cruiser. According to CBS News, three Wyoming Highway Patrol troopers responded to an accident along Interstate 80 near Elk Mountain on February 7. While the troopers were out of their cars assisting the crash victims, a white Volvo semi-truck lumbered up I-80 toward them. Wind gusts in that part of Wyoming were clocked in at up to 90 miles per hour on Tuesday, and one of them caught the semi as it neared the parked cruisers. Video from one of the cruiser's onboard cameras showed the big rig drift to the right as a big gust hit the trailer. Slowly, the whole rig tipped over and flattened one of the parked cruisers. The truck then slid a few feet on its side and came to a stop just aft of the cruiser. None of the troopers were injured in the incident, and two people in the truck came out of it unhurt as well. Patrol Lieutenant David Wagener told KGWN that that stretch of I-80 was closed on Tuesday to lightweight, high-profile vehicles. The truck driver was cited for the incident. High winds are no joke, and vehicles getting blown around or even clean off the road is a pretty common phenomenon. Way back in 2011, a truck got blown over in Utah. Then there was a train that got blown off a bridge in Louisiana in 2015. Related Video: News Source: CBS News, KGWN Auto News Dodge Volvo Driving Safety Truck Commercial Vehicles Police/Emergency Sedan semi truck rollover wyoming

Volvo P1800-based gasser is UK's entry in the Hot Wheels Legends Tour

Hot Wheels has spent the past few months touring the United States in search of the next custom car it will add to its catalog of 1/64-scale diecast models. It's not stopping there: It also headed to the United Kingdom to add a bit of international flair to the competition, and it selected a Volvo P1800 that has been heavily modified into a gasser as the winner that will move on to the semifinal round. Owner Lee Johnstone explained he built his P1800 — which he nicknamed "Ain't no Saint" — starting with a bare shell that had been stripped and that was too far gone to properly restore. Volvo's 1960s four-cylinder engines are famously tunable, but Johnstone looked across the pond for an engine suitable to make his dream car a reality. He chose a 454-cubic-inch V8 sourced from the Chevrolet parts bin and supercharged to develop about 600 horsepower. Ain't no Saint reportedly runs a 10.01-second quarter mile at 133 mph. Johnstone regularly races the P1800 with his three daughters. He consequently named his team Johnstone & Daughters (JD) Racing. "This is a beautiful example of a gasser — a drag racer with street car form. Often with dragsters, the chassis is so important that the body gets overlooked, but this example is fabulous with great attention to detail," explained former Jaguar design director Ian Callum, who was one of the judges that selected the P1800 as the United Kingdom's finalist. "It completely hits the Hot Wheels brief." Hot Wheels has already released several gassers, including one based on a 1955 Chevrolet Bel Air. Time will tell if Johnstone's P1800 will become the next addition to the series. Its next stop is the global semifinal round scheduled for November 4, 2021, where it will compete against some of the previous winners. There are two semifinal rounds taking place before the grand finale planned for November 13.