2013 Volvo C70 T5 on 2040-cars

Auto blog

Volvo considering offering V60 wagon in the US

For the 2014 model year, the Volvo product line is shrinking to just five models in the United States: the S60, S80, XC60, XC70 and XC90. This comes following the death of the C30 hatchback and C70 convertible, which are being discontinued after the 2013 model year. The S40 sedan and V50 wagon were axed two years ago, as was the larger V70.
That may not be the case, however. According to Automotive News, Volvo is rethinking its decision to not sell the V60 wagon, pictured, in the United States. The automaker had originally decided to not offer the V60 in our market due to declining American wagon sales. A decision is expected to be made sometime in the next quarter, and if approved, sales of the V60 could begin in the US within the next year.
At the Geneva Motor Show last week, Volvo showed off refreshed versions of nearly every vehicle in its lineup. In the US, these will be the only changes coming to the Volvo brand over the next two years. The next big product launch in the States will be the all-new XC90 crossover, developed under new parent company Geely. The range-topping SUV will ride on the company's new flexible SPA platform, which will also underpin the next-generation versions of the S60, S80 and XC60.

Volvo planning an electric sedan prototype perhaps called ES90

The Automotive News future product pipeline indicates Volvo's planning to begin production of an electric version of the S90 sedan in late 2024, with sales to begin in 2025. The car is definitely coming, and could be here on the early side. Swedish outlet Teknikens Varld (translated) got eyes on a post from Volvo's internal website celebrating the completion of a verification prototype (VP) of a car internally called the V551, publicly expected to be the ES90. Workers at Geely's Cixi Assembly Plant south of Shanghai marked the arrival of the car in a photo under a banner reading, "Volvo Cars V551 First VP Car Celebration," in front of a vehicle covered by a tarp stamped with "Confidential Top Secret." We don't know the production model will be called ES90, but the naming scheme fits if using the EX90 as a guide. Volvo applied to trademark the name, the potential hitch being that Lexus has indicated its displeasure with Volvo putting an ES model on the market since Lexus has its long-lived ES-followed-by-a-number sedan.     Volvo documents leaked online last year point to a body sized between the short- and long-wheelbase versions of the gas-powered S90 (pictured above), sitting on the same SPA2 platform as the recently introduced EX90. Dimensions come in at 196.4 inches long, 76.6 inches wide, and 60.9 inches high on a 122-inch wheelbase. This would make it four inches shorter than the current S90 long-wheelbase, the only version sold anymore, 1.7 inches wider, and 3.2 inches taller, with a wheelbase 1.5 inches longer. If this is how it turns out for production, the ES90 will be 1.5 inches shorter than the EX90 but have a wheelbase 2.5 inches longer — a chauffeur special for the Chinese market, perhaps. A 111-kWh battery pack (107 kWh usable) would be the same spec that powers the EX90, the ES90 in rear-drive trim expected to be good for nearly 600 kilometers (373 miles) on China's CLTC vehicle regimen. We need clarity on other rumored specs like a powertrain making 455 horsepower and 523 pound-feet, a curb weight of 5,511 pounds for an RWD trim and 5,732 pounds for dual-motor AWD.

Volvo reveals its first vehicle made of fossil-free steel

A few months ago, Volvo teamed up with Swedish steel producer SSAB to develop a type of steel it can use for its vehicles that doesn't use fossil fuels. Now, the automaker has revealed what it says is the world's first vehicle made of fossil-free steel: A four wheeled fully electric load carrier made for quarrying and mining. In addition to having no greenhouse gas emission, it's also autonomous and can follow a pre-programmed route to transport materials at a job site. SSAB produces fossil-free steel by replacing the coal used during the manufacturing process with hydrogen from electrolysis. As Forbes notes, though, the whole vehicle isn't exactly fossil-free, since the steel used for its components provided by third-party suppliers, such as its electric motor, were made using traditional means. Still, Volvo Group CTO Lars Stenqvist told the publication that "majority of the steel" in the vehicle is fossil free. He said three tons of the carrier's 8.2-ton weight is made of green steel from SSAB, and those eight tons include other heavy components like the vehicle's tires. Volvo plans to start a small-scale production for the vehicle next year and to scale up production, depending on the availability of steel from SSAB. The Swedish manufacturer is hoping to start mass-producing its fossil-free steel in 2026, so we may see more Volvo vehicles made using the material by that time. Martin Lundstedt, President and CEO Volvo Group, said in a statement: "This initiative with SSAB sets the benchmark for a fossil-free future. Just as the nations of the world come together at COP26 to address climate change, so too must organizations and industries work in collaboration to develop innovative new solutions for a greenhouse gas emission free future. Volvo Group is committed to pioneering partnerships such as this with SSAB to develop attractive, safe and efficient new vehicles and machines that pave the way for a more sustainable transport and infrastructure system adopted for the future." This article originally appeared on Engadget. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.