2011 Volkswagen Gti H/b 6-speed Modified Suspension Exhaust Moonroof Alloys on 2040-cars

Auto blog

Volkswagen Motorsport cranks out Golf touring car

Just when you thought Volkswagen had done all the hot Golfs we could handle, its motorsports division has come out with an even hotter one. This racing version is built to compete in the Touringcar Racer International Series (TCR) across Europe and Asia, and certainly looks the part. Based on the production Golf hatchback we all know, the TCR competition version promises to be to circuit-based touring car racing what the Polo R WRC is to the rally stage. And that little pocket rocket has been positively dominating the World Rally Championship. Developed in conjunction with Seat's racing department and Liqui Moly Team Engstler, the Golf touring car packs the 2.0-liter turbo four from the Golf R. Only instead of 292 horsepower and 280 pound-feet of torque in the production version, it's been tuned to channel 330 hp and 302 lb-ft to the front wheels (instead of all four) through a six-speed dual-clutch transmission. It rides on 18-inch alloys fitted to a track widened by nearly a foot and a half, along with a competition-spec aero kit to keep it glued to the tarmac and a stripped-out cockpit. Though the 2015 TCR series is already under way, a pair of these racing Golfs will be entered in the upcoming round at the Red Bull Ring in Austria, before the series heads off to Singapore (in support of the F1 grand prix there) and Thailand ahead of the final round in Macau. If everything goes well, customer teams will be able to pick these up and enter them in next year's championship. Volkswagen develops new Golf for the racetrack - Concept car for customer racing, in line with new TCR regulations - Production-based touring car with 330 hp, front-wheel drive and six-speed DSG gearbox - First competitive test this weekend in Spielberg (A) Wolfsburg (09 July 2015). A new Golf for the racetrack: Volkswagen Motorsport is developing its first racing car based on the seventh generation Golf. The production-based, 330-hp concept car is assembled in accordance with TCR regulations and is intended to help Volkswagen evaluate a potential customer racing programme from the 2016 season onwards. In order to accelerate the development of the car, the new Golf will be tested under competitive conditions between now and the end of the season: as cooperation partner, the Liqui Moly Team Engstler will run two cars at the eighth round of the Touringcar Racer International Series (TCR) at the Red Bull Ring in Spielberg (A).

Daily Driver: 2015 Volkswagen CC

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers that drive them every day. Today's Daily Driver features the 2015 Volkswagen CC Executive, reviewed by Seyth Miersma. You can watch the video above or read a transcript below. And don't forget to watch more Autoblog videos at /videos. Show full video transcript text [00:00:00] Hi, guys. This is Seyth with Autoblog, and I'm driving the 2015 Volkswagen CC. The version of the car I'm in is the VR6 4motion car, so it's got a six-cylinder engine and all-wheel drive. This six-cylinder is actually a little bit of an odd duck at this point for the class. It's a 3.6 liter V6. It makes 280 horsepower, 265 pound-feet of torque. It's really living in a world that's been [00:00:30] overtaken by potent, two-liter turbos. I think something that's particularly difficult, especially in light of what I know about the Volkswagen family, the new engines getting great fuel economy. The 1.8T and obviously the TDI are real champs in that regard. Unfortunately, this VR6 is really sucking down the premium. These days, a 20 MPG combined rating is not particularly good. This definitely isn't a sports car. If you throw it hard into a corner, it leans a little bit, you can feel some roll [00:01:00] through the suspension. Handling is tidy, but it's not particularly precise. Of course, it's not really meant to be. This is a car that's meant to be great on the highway, great cruiser, look pretty stylish, and with a good powertrain, it can be exciting enough. Because you're not getting anything else that's very sports car-like about this car, other than the power delivery, and even there it's not quite on-pace with some of the sporty sedans that you can buy for right around the same money. It just makes for an interesting mix; something that's a little bit fast, [00:01:30] not very fuel-efficient, not a great handler, not a premium badge. Let's cut down right to it. This car is $44,400 and some change. Again, the VR6 4motion Executive Trim level, which means it pretty much gets everything you can get in a CC. We've got leather seats; they are heated. They have a massaging seat on the driver's side. I've got some 18-inch wheels that look pretty good. Big head unit with touch-screen and [00:02:00] navigation, satellite radio, better sound system. Just in general, the car feels very well-appointed. It feels like an entry-level luxury car.

Get ready to Camino-ize your fourth-generation VW Jetta with this kit

Inexpensive, small pickup trucks used to be everywhere in the US, whether they were from Japanese brands like Datsun or Toyota, the truly weird Subaru Brat or even from Europe with the Volkswagen Caddy based on the Golf. These days that market has completely disappeared, but if you're willing to pick up some tools to build your own, there's a company out there bringing the Caddy back as a kit for the Jetta.
Mark Smith knows a thing about building a vehicle at home. He has over two decades in the DIY-car business as a co-founder of Local Motors and the company that became Factory Five Racing. His latest venture is Smyth Performance and already offers a mid-engine, VW-based kit called the G3F. His new product, though, started as a fluke. "I just wanted a shop truck," said Smith to Autoblog. He already had a Ford F-450 but found that he was driving around with the bed empty most of the time. The result was a pickup truck based on the fourth-generation Jetta that he dubbed the Ute.
The kit retails for $3,500 and ships in three, big boxes, and it's designed to be built and painted in a weekend. Buyers get fiberglass exterior panels, a fiberglass rear window surround, sliding rear window, an aluminum reinforced bed with a tubular steel subframe, taillights, a fully functional steel tailgate, and other parts. In the end, you get a vehicle with a six-foot bed and a payload of around 700-750 pounds. The Ute maintains all of the factory suspension, fuel tank and emissions equipment and requires just a few cuts in the body to complete. "We did a modern Caddy," admits Smith.