2011 Toyota Tacoma Double Cab Trd Xpro Edition.....2011 Toyota Tacoma Double Cab on 2040-cars

Auto blog

Toyota GT86 14R-60 shows how to do lightweight at a steep price

Toyota is finally making good on its Griffon concept from last year with this limited-edition 14R-60 that basically hops through the Toyota Racing Development catalog to imagine the ultimate lightweight GT86 (the continental relative to the Scion FR-S/Subaru BR-Z). Unfortunately, it's not coming stateside, and even if this modded Toyobaru were coming here, you might not want to pay the rather steep price.
Like the concept, the 2.0-liter boxer engine still makes the same 197 horsepower and 151 pound-feet of torque. However, the drivetrain isn't entirely untouched thanks to a new air filter, engine oil cooler, a reinforced clutch, lightweight flywheel, and mechanical limited-slip differential from TRD. The six-speed transmission is also tweaked, with different gearing in first and second and an altered final drive ratio.
To keep things planted the suspension gets a new coilovers, a V-shaped tower brace in the front and another in the rear. Improved deceleration comes thanks to upgraded brakes. There also are even more goodies on the outside, including a complete body kit that includes a carbon-fiber roof and massive rear spoiler. The stock wheels are replaced with 18-inch forged magnesium units, as well.

Toyota Camry lineup gets interior and tech updates one year in

When it debuted last year, the Toyota Camry came in for some criticism over its interior, most centered on material choices - both in quality (not enough) and variety (too much). Thus, Toyota has responded after just one model year, updating both materials and features on its gas-powered and hybrid family sedans for 2013.
The LE version appeared to get the lion's share of the improvements. Specifically, the LE is getting "soft-touch" door materials as well as armrests that match the rest of the interior color (instead of being black). The LE model also gets Toyota's six-inch display screen that helps folks get a better gander at the car's energy usage and fuel economy, among other things. Other changes include adding cross-traffic alert for models equipped with blind spot monitoring
Toyota introduced its latest version of the Camry and Camry Hybrid in the fall of 2011 as a 2012 model. Sales have been solid, and in particular, the Camry Hybrid has improved its fortunes, bumping its US sales almost fivefold to more than 45,000 units. So far in 2013, the latter has carried over much of that momentum, boosting January 2013 sales from a year earlier by 81 percent to 3,826 units.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.