2002 Toyota Tacoma Dlx Extended Cab Pickup 2-door 2.4l on 2040-cars

Auto blog

Earthquake causes most of Toyota's Japan operations to shut down

Toyota is idling a large portion of its Japanese assembly plants as a result of the devastating earthquake in Hokkaido, Japan. The earthquake had such a big effect on the carmaker's supply chain that a number of its plants will have to be shut down for an undisclosed period, starting on Saturday. The 6.7 magnitude earthquake occurred early on September 6 th, resulting in more than dozen casualties and hundreds of injuries, cutting power to the entire island; the powerplant supplying half of the island's power was located so close to the earthquake's epicenter that it shut down automatically, bringing down the rest of the island's grid with it. Tens of people were also reported missing, as reported by Reuters. The affected factories are the Kyushu, Tahara and Toyota Auto Body plants, according to Automotive News, and they manufacture vehicles such as different Lexus models and the Toyota Land Cruiser. Some of the models produced in these factories are exported to the United States, but a Toyota spokesman said that North American operations are not likely to be significantly affected by the plant closures. As well as the automobile assembly plants in Hokkaido, Toyota also has a facility there that manufactures transmissions and transfer cases. As it was also without power, Toyota could not confirm when the plant would be back online. Out of Hokkaido's 2.95 million households, 1.54 million had regained power by Friday afternoon. All in all, Toyota has 18 manufacturing facilities in Japan; spokeswoman Akito Kita said that from Monday on, the shutdown will affect all Japanese Toyota and Lexus lines — not including two Daihatsu facilities that are also used for Toyota products. The shutdowns come directly after Toyota also announced a recall for Japanese-built hybrid models, mainly Prius. Related Video:

Autoblog's June 2019 Editors' Picks

Each year we review, test and rate hundreds of brand-new cars, trucks and SUVs. We rate these vehicles using the Autoblog score, giving a select few our Editors’ Pick. Here are the best cars we drove in June 2019. 2019 BMW 8 Series Everyone on the Autoblog staff loves a good grand tourer, so we were excited to get behind the wheel of the revived BMW 8 Series, specifically an M850i Coupe. A good GT needs to be as fast as it is stylish and comfortable, and the new 8 Series delivers. We particularly like the 523-horsepower twin-turbo 4.4-liter V8Â’s copious power and smooth ride quality, even on MichiganÂ’s pockmarked post-winter roads. We dig the interior design, too, though not everyone was in love with the exterior. ItÂ’s not the best-handling car in its class, and doesnÂ’t hide its sizable proportions very well, but itÂ’s still worth a look if youÂ’re looking for a big, fast cruiser.  2019 Ford Expedition Crossovers may be the hottest vehicles on the market, but thereÂ’s still a sizable demand for traditional body-on-frame SUVs like the Ford Expedition. These behemoths offer plenty of space in addition to truck-like capability. We like the Expedition's smooth ride, powerful twin-turbo V6 and sharp exterior design, though the interior can feel a bit cheap, especially on some of the more expensive trims. Adding options quickly puts it into Lincoln Navigator territory, and itÂ’s hard to recommend the Ford over the Lincoln when the latter packs the same capability into a far nicer package. Still, the Expedition is as good or better than the competition in most respects, and thatÂ’s why itÂ’s one of our picks. 2019 Toyota 86 Few cars at any price point are as much fun as the Toyota 86 (and its twin, the Subaru BRZ). We like the 86Â’s balanced chassis and sharp steering, and while itÂ’s not as nimble as its close rival the Mazda MX-5 Miata, the ToyotaÂ’s back seat and trunk make it a more usable vehicle. But while we like the 86Â’s driving position, the rest of the interior feels cheap and dated, especially the infotainment system. We complained about the anemic powertrain back in 2012, and itÂ’s only gotten worse as the years have gone by.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.