2014 Toyota Sienna Xle on 2040-cars

Auto blog

Aging Prius, dropping gas prices putting hurt on hybrid, EV sales

"As Prius represents by far the biggest chunk of the hybrid marketplace, where Prius goes, the segment goes," - Ed Kim, Autopacific
Fuel prices in the US have been tumbling for the last several weeks, with the average price of a gallon of gas at $3.120 as of October 20, according to the US Energy Information Administration. That price reflects a serious recent drop from $3.299 on October 6. Reports have even suggested that those low numbers might not change for a little while, perhaps as long as years. While drivers certainly love paying less at the pump, the change may be hurting the market for more fuel-efficient models, including the Toyota Prius.

Lost power in a winter storm? Just hook up a Toyota Prius like this guy did

The Toyota Prius' battery pack just got something like a five-star rating from a truly seasoned professional – a 50-year aircraft technician. Bob Osemlak, who'd served more than three of those five decades with the Canadian Air Force, brought electricity back to his home in December during a heavy ice storm thanks to his gas-electric car. His ingenuity allowed him to turn on lights, furnace, refrigerator and the TV. The Thornhill, Ontario resident lost power for nearly a day on December 21 – not nearly as much as millions of other people hit by the recent storm - and so he still set about using his Prius for backup power, according to EV World. His ingenuity allowed him to turn on lights, furnace, refrigerator and the TV. Being an aircraft technician for so long brought Osemlak the ability to home-brew his V2H set-up that he urges other people to avoid, for safety reasons. He had planned for a potential power outage by installing an outlet on his furnace and, when the storm struck, he ran a cord through the basement window to the car. During the nine hours Osemlak used his Prius for backup power, the car's fuel gauge only reduced less than one bar, or roughly the equivalent of a gallon of gasoline. It wasn't the first time Osemlak had played with his vehicle. In the 1960s, while stationed in Winnepeg, Manitoba, he created a car starter. Every hour, the car would start up and run for 10 minutes to avoid being frozen solid in frigid winter temperatures. Featured Gallery News Source: EV WorldImage Credit: Flickr Green Toyota Green Culture Hybrid PHEV vehicle to grid storm

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.