2004 Toyota Sienna Xle Limited Minivan (fully Loaded) - $10850 (sudbury, Ma) on 2040-cars

Auto blog

Toyota Recalls 1.9 Million Prius Hybrids

TOKYO (AP) - Toyota is recalling 1.9 million hybrid Prius cars globally for a software glitch that could cause the vehicle to stall. Toyota Motor Corp. said Wednesday that 997,000 Prius cars in Japan, some 713,000 in North America, another 130,000 in Europe and the rest in other regions are being recalled for a problem in the software to control the hybrid system. No accidents or injuries have been reported related to the problem. The software could cause transistors to become damaged, causing warnings lights to go off, driving power to be reduced or the car to stop. The recalled vehicles were manufactured between March 2009 and February 2014. The Japanese automaker suffered massive recalls starting in 2009, affecting more than 14 million vehicles for problems including floor mats, gas pedals and brakes. Affected vehicles include: 2010-2014 Prius vehicles, 2012 Toyota RAV4, 2012-2013 Toyota Tacoma and 2012-2013 Lexus RX 350 vehicles sold in the United States. Related Gallery AOL Autos Test Drive: 2014 Toyota Highlander Recalls Toyota

2020 Toyota Highlander vs other 3-row crossovers: There can only be one!

We've done quite a few spec comparison posts involving three-row family crossovers, and when included, the Toyota Highlander has always been the runt of the group. While the rest increasingly seemed to be benchmarking each other toward greater girth, the Highlander was the outlier.  That changes a bit for the 2020 Toyota Highlander, but only a bit. It's now larger and more competitive, specifically in regards to the amount of cargo space aft of the third-row seat. As you can see below, this aligns the Highlander most closely to its long-time competitor the 2020 Honda Pilot. However, let's see how it stacks up to others in the segment, which is heavily populated now, so for the sake of space, we've selected the newest entries: Kia Telluride, Hyundai Palisade, Subaru Ascent and Ford Explorer. The order in which they are presented is random.  Performance and fuel economy The 2020 Highlander is more than 200 pounds lighter than its predecessor, but has the same 295-horsepower V6 engine that was already one of the strongest in the segment. We'd say that would give it a leg up, but the Pilot and Explorer have proven to be sprinters, delivering 0-60 times in the low-6 range by some publications' stopwatches (or VBoxes, whatever). We don't expect the Highlander to beat them, but it may dip into the 6's. The heavy, less-powerful Subaru Ascent is most likely to take up the rear. It's fuel economy of 23 mpg combined also matches the Highlander and Explorer for segment-best. Remember, however, that the Explorer's turbocharged inline-four engine is likely more susceptible to differences in driving style (read: a heavy foot).  Of course, if you're really interested in fuel economy, the Highlander and Explorer are the only vehicles in the segment to offer hybrid versions. The Ford Explorer Hybrid puts a greater emphasis on performance, however, resulting in lower estimates of 25 mpg combined (AWD) and 28 mpg combined (FWD). By contrast, the new 2020 Toyota Highlander Hybrid is estimated to return 36 mpg combined.  Passenger and cargo space According to Highlander chief engineer Yoshikazu Saeki, he had a choice of two directions with the new Highlander. He could have indeed made it bigger, matching these very competitors, especially in terms of third-row and cargo space. Or, he could have maintained a smaller-than-average size. He obviously chose the latter. First, it was the size customers had come to expect. Would they be put off by something bigger?

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.