2007 Toyota Corolla Le. Silver, Grey Interior, Clean. Non-smoker, Runs Great on 2040-cars

Auto blog

Could high demand, low supply doom Toyota Mirai?

Toyota recently gave the world a behind-the-scenes look at the small-scale production of the Mirai hydrogen fuel cell sedan. A team of just 13 people assembles three of them per day, and the Japanese automaker is using this rigorous build process to prioritize quality for each one. Although, there's some concern about whether the Mirai could become a victim of its own, growing success. The company reportedly already has 2,000 orders for the Mirai just in Japan, and an anonymous Toyota executive tells Automotive News that the waiting list is now "two years or something" to receive one. Keep in mind, this figure is before customers elsewhere in the world have any requests in, and the US launch is planned for California this fall with sales in Europe starting this summer. The automaker is keeping North American demand somewhat in check by only planning to move 200 vehicles or fewer on the West Coast in 2015. So, unless Toyota can pick up the production pace, the waiting list seems likely only to grow longer. Automotive News speculates that the company might be in danger of Mirai customers losing interest if they are forced to build anticipation for too long. That especially could be the case with a new Prius likely to be unveiled by the end of the year that could lure folks away It seems that Toyota is trying to react to the higher-than-expected demand for its hydrogen-powered model, though. In December, the automaker invested $168 million to add two more assembly lines for the Mirai's fuel cell stack and hydrogen tank. Related Video:

Toyota bringing refreshed Auris to Geneva

Americans got a chance to see the Toyota Auris dressed up as the Scion iM concept at the LA Auto Show a few months ago, but the Japanese automaker isn't about to leave its European customers who call the Auris their own out of the action. Toyota will be showcasing a revised version for the local market at the 2015 Geneva Motor Show. For those unfamiliar, the Auris is essentially a Corolla with a liftgate at the back – or put another way, the European counterpart to what we once knew as the Matrix. It's available in hatchback and Touring Sports wagon body styles, and with gasoline, diesel or hybrid powertrain options. Though the hybrid (which accounted for half of the model line's sales last year) carries over unchanged, the updated Auris will get new gasoline and diesel engines. Along with them, the refreshed Auris also benefits from revised sheetmetal, a remodeled cabin and some upgraded equipment. Full details will be announced closer to its debut alongside the larger new Avensis at the Swiss auto expo. NEW TOYOTA AURIS TO JOIN NEW AVENSIS ON STAGE AT GENEVA Motor show debut for British-built Auris hatchback and wagon Toyota will reveal its new Auris at the Geneva motor show (3 – 15 March), the British-built hatchback and Touring Sports wagon versions making their debut alongside new Avensis. New Auris enjoys a refreshed design that adds presence and prestige, together with an upgraded cabin and new comfort and safety equipment features. The hybrid remains at the heart of the range, having established itself as the leading powertrain in the line-up, accounting for around half of all Auris sales in Europe in 2014. Nonetheless, the new model heralds the arrival of new and improved petrol and diesel engines, developed with a focus on efficiency and performance. The simultaneous reveal of new Auris and Avensis follows on from last year's introduction of Aygo and Yaris to complete a full rejuvenation of Toyota's core European model range. Both Auris and Avensis will continue to be built side by side at Toyota Manufacturing UK's car plant at Burnaston, near Derby. Toyota will host its Geneva motor show press conference on its stand in Hall 4 at Palexpo, at 12.15pm on 3 March. Featured Gallery 2016 Toyota Auris News Source: Toyota Geneva Motor Show Toyota Hatchback Wagon Economy Cars 2015 Geneva Motor Show

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.