2001 Toyota Corolla Le - $5900 on 2040-cars

Auto blog

Senator pushes for up to life sentence for auto execs found to delay recalls

Democratic Senator Claire McCaskill (shown above) has had it with automotive execs stalling when it comes to recalls. The Missiourian has proposed a new bill, the Motor Vehicle and Highway Safety Enhancement Act, which aims to improve the automotive safety following the high-profile fiascos involving General Motors and Toyota. Aside from a doubling of the budget for the National Highway Traffic Safety Administration over the next six years and the removal of the $35-million limit for fining automakers, the plan includes a provision that would punish auto executives if it's discovered they knowingly delayed recalls. How will it punish them, you ask? Oh, you know, just life in prison. The bill "gives federal prosecutors greater discretion to bring criminal prosecutions for auto safety violations and increases the possible penalties, including up to life in prison for violations that result in death," McCaskill's office told The Detroit News. If a delayed recall led to serious injuries, meanwhile, execs could still face a 15-year stint behind bars. As for that change in the fine structure for automakers, the removal of the limit is complemented by a hefty increase in the per-vehicle fine, from $5,000 to $25,000. With this change, GM could have been on the hook for $55 billion (with a "b") in fines for its bumbling of the ignition switch recall, rather than just $35 million. The News says, though, that NHTSA has "wide discretion" in handing out the fines. Considering a $55-billion fine is enough to sink any automaker, it is unlikely that such a monumental sum would be handed out. Still, the potential threat of such a death sentence should be enough for any automaker to sit up and take notice. "With millions of Americans behind the wheel every day, and more than 33,000 killed on our roads each year, we've got to do more to keep our cars and the roads we drive them on safe," McCaskill said, according to The News. "Painful recent examples at Toyota and GM have shown us we also must make it easier to hold accountable those who jeopardize consumers' safety. For too long, auto safety resources have remained virtually stagnant while cars and the safety challenges they present have become more complex." What do you think? Do you agree with McCaskill's proposed bill? Should the punishments for automakers and execs be more or less harsh? Have your say in Comments. News Source: The Detroit NewsImage Credit: J.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017