1994 Toyota Celica on 2040-cars

Auto blog

Toyota investing $750M, adding 600 jobs at 5 U.S. plants

BUFFALO, W.Va. — Toyota on Thursday announced it is investing an additional $750 million at five U.S. plants that will bring nearly 600 new jobs, including the production of two hybrid vehicles for the first time at its Kentucky facility. It marks yet another expansion of the Japanese automaker's U.S. presence, bringing to nearly $13 billion the amount it will spend by 2021. The latest investments are at facilities in Alabama, Kentucky, Missouri, Tennessee and West Virginia. Those same facilities were part of a 2017 announcement by Toyota for a $374 million investment to support production of its first American-made hybrid powertrain. Toyota Motor North America CEO Jim Lentz said the latest investments "represent even more examples of our long-term commitment to build where we sell. By boosting our U.S. manufacturing footprint, we can better serve our customers and dealers and position our manufacturing plants for future success with more domestic capacity." Toyota's Georgetown, Kentucky, facility will get a $238 million infusion to produce hybrid versions of Lexus ES 300 sedans starting in May and the Rav4 SUV starting in January 2020, the company announced. It also includes $288 million to increase annual engine capacity at Toyota's Huntsville, Alabama, facility. The plant will add 450 jobs to accommodate new four-cylinder and V6 engine production lines. Last year Toyota and Mazda announced plans to build a $1.6 billion joint-venture plant in Huntsville that will eventually employ about 4,000 people. Toyota also is spending $62 million on equipment to boost production of Toyota and Lexus cylinder heads at its Bodine Aluminum facility in Troy, Missouri, as part of its cost-saving New Global Architecture production strategy to share common parts and components among different vehicles. A $50 million expansion and equipment upgrade at its Bodine plant in Jackson, Tennessee, will add 13 jobs and produce engine blocks while doubling the capacity of hybrid transaxle cases and housings. And Toyota will add 123 jobs and spent $111 million to expand its plant and purchase equipment in Buffalo, West Virginia, to double the capacity of hybrid transaxles. Previously, Toyota also announced a $600 million investment at its Princeton, Indiana, plant to increase the capacity of its Highlander SUV and to incorporate the new production strategy, and $170 million to launch the 2020 Corolla on a new production line in Blue Springs, Mississippi.

Toyota recalls 2016 RAV4, RX350, and ES350 for stability failure

The Basics: Toyota will recall 4,170 examples of the 2016 RAV4, 90 units of the 2016 Lexus RX350, and 12,400 units of the 2016 ES350. The Problem: A component in the brake actuator assembly may have damage from a manufacturing error. The actuator controls the anti-lock brakes, traction control, stability control, and other systems. If the part doesn't work properly these safety systems might not activate properly. Accidents/Injuries: Toyota spokesperson Amanda Rice told Autoblog, "Regarding the recent recalls, alleged crashes, injuries, and fatalities are reported in many ways to many different organizations. We are not providing specifics at this time." The Fix: Dealers will check the brake actuator's serial number and will replace it if the part comes from a period when the damage could have happened. If you own one: Toyota will contact affected owners by mail. Related Video: TOYOTA RECALLS CERTAIN 2016 MODEL YEAR RAV4 AND LEXUS RX AND ES VEHICLES TORRANCE, Calif., April 6, 2016 – Toyota Motor Sales, USA, Inc. today announced that it is recalling approximately 4,170 Model Year 2016 Toyota RAV4; approximately 90 Model Year 2016 RX350; and approximately 12,400 Model Year 2016 ES350. The involved vehicles are equipped with a Brake Actuator assembly that enables enhanced brake control functions including the Anti-lock Braking System (ABS), Traction Control (TRAC), and Vehicle Stability Control (VSC), among others. There is a possibility that a component inside the actuator could have been damaged during manufacturing, preventing the actuator from operating properly. This could cause a loss of vehicle stability control, increasing the risk of crash. All known owners of the affected Toyota vehicles will be notified by first class mail. Toyota and Lexus dealers will check the serial number of the Brake Actuator and replace actuators assembled during a specific production period. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-do-date Safety Recall information on Toyota, Lexus or Scion vehicles, customers should check their vehicle's status by visiting toyota.com/recall and entering the Vehicle Identification Number (VIN). Safety Recall inquiry by individual VIN is also available at the NHTSA site: safercar.gov/vin.

Recharge Wrap-up: Honda FCV Concept comes to Detroit, Toyota seeks young green energy fellows

Honda will bring its FCV Concept to the 2015 North American International Auto Show in Detroit in January. The hydrogen-powered concept made its Japanese debut in November, and will now make its way to North America for the first time. The FCV concept improves upon the design of the FCX Clarity with a more striking appearance and roomier interior. Its smaller powertrain packaging means more space for people, and the FCV Concept seats five passengers. Honda also expects the next-generation fuel-cell car, which is scheduled to go on sale in Japan in March 2016, to cost less and have a range of over 300 miles. Read more in the press release below. The Mercedes-Benz B-Class Electric Drive has been awarded an environmental certificate from the TUV Sud technical inspection authority. The certificate is based not just on the vehicle's operation, but the entire lifecycle of the car, including production and recycling. The B-Class Electric Drive produces 24 percent less CO2 over its lifecycle than the Mercedes-Benz B180 when using the EU electricity mix, and 64 percent less when powered by hydroelectricity. Mercedes credits not just the use of electricity, but also the car's energy management system - such as its radar-based regenerative braking - for its carbon reductions. Read more in the press release below. Scania will test a wirelessly charged plug-in hybrid bus in Sweden. Beginning in June 2016, the bus will be put to daily use in Sodertalje. One of its stops will have a wireless charging station where the bus will recharge for six to seven minutes before continuing on its route again. The charger is located under the road surface and the bus positions itself above it to charge inductively. About $1.3 million will come from the Swedish Energy Agency to fund the test project, which could save up to 90 percent of fuel costs. If expanded to a fleet of 2,000 buses, it could save up to 13 million gallons of fuel each year. Read more at Green Car Congress, and in the press release below. Sandia National Laboratories and Linde are teaming up to expand hydrogen fueling infrastructure. The two groups have signed an agreement to research and develop new hydrogen stations, as well as ways to make fuel cell vehicles more desirable for consumers. They are looking at ways to incorporate hydrogen into existing fuel stations where possible, and make sure that it is able to be done safely.