2007 Toyota Camry Solara Se on 2040-cars

Auto blog

Toyota wants improved crash scores with midcycle facelifts

The performances of some Toyotas in the Insurance Institute for Highway Safety's (IIHS) regimen of crash tests leave something to be desired. Consider the small overlap frontal crash test: only six Toyota, Lexus and Scion vehicles have undergone the new test, yet all but one of them received a poor rating. Osama Nagata, CEO of Toyota Motor Engineering & Manufacturing North America Inc., says midcycle vehicle updates are in the works to address the safety issues brought to light by the IIHS test, Automotive News reports. He confirmed that the RAV4 is getting safety updates following its crash test performance last month, but he didn't name any other models.
All three Toyotas that were tested - 2013 RAV4, 2012-2013 Prius V, 2012-2013 Camry - received poor ratings. The 2007-2012 Lexus ES 350 and 2006-2013 IS 250/350 also received poor ratings. The only other Toyota Motor Corp. vehicle to score better than poor is the 2014 Scion TC. It received an acceptable rating in the small overlap frontal crash test and is the only recent vehicle in Toyota's line-up to get the IIHS Top Safety Pick+ rating.
The small overlap front crash test measures the safety of a car when its front left corner is strikes an object during an accident, bypassing traditional crumple zones, which deform in a way to protect passengers. In 2009, automakers were alerted to the forthcoming addition of the test, which was first implemented last year, IIHS spokesman Russ Rader says. They responded with differing intensity, he says, pointing out that Subaru and Honda started incorporating design changes early on so their cars would perform well in the tests.

Toyota says freezing temps pose zero problems for fuel cell vehicles

Hydrogen-powered fuel cell electric vehicles are not afraid of one thing – freezing cold weather. That's the latest from two companies that have been driving the cars in frostbite temperatures in the Northeast recently. Proton Onsite runs a fleet of 10 Toyota FCHV-adv fuel cell vehicles out of its Connecticut headquarters and discovered that the snow and three-degree temperature didn't restrict range. Mark Schiller, Proton vice president of business development, said in a statement that, "I went out to my Toyota FCHV-adv and brushed off a foot of snow before starting the car right up. No problem." While electric vehicles can have their driving range reduced in extreme temperatures (but not always), Proton Onsite hasn't seen that happen in the Polar Vortex. They're performing flawlessly in freezing temperatures even with the heaters blasting, and are continuing to hit their range of about 300 miles, Schiller said. Air Products, based on Allentown, PA, has had a similar experience. The FCHV-adv has had great performance under harsh conditions, according to Nick Mittica, commercial manager, hydrogen energy systems. Employees drove the fuel cell vehicle during one of Pennsylvania's worst winters in recent memory and, you guessed it, "No problem." Toyota says that has put its fuel cell fleet through the wringer, logging millions of miles over the last decade, to make sure performance can be delivered within extreme weather conditions. Toyota engineers spent weeks testing cold weather start up, performance and durability up in Yellowknife, Canada. Temperature can reach -30 degrees Celsius (-22 degrees Fahrenheit) at that location. On other end of the scale, Toyota was able to verify that its FCVs can handle driving through heat in Death Valley national park. We heard the same from Mercedes the other day, too. Extreme weather functionality is apparently something automakers want to make absolutely sure the public doesn't worry about. Jan. 30, 2014 – Record low temperatures have stranded many East Coast drivers, but not those driving a Toyota fuel cell hybrid vehicle. Connecticut-based Proton Onsite, which operates a fleet of ten Toyota FCHV-adv fuel cell vehicles, says that even in single digit temperatures, the FCHV-adv shows no signs of frostbite. "We had another snow storm Tuesday night and this morning the temperature was 3 degrees," says Mark Schiller, Proton vice president of business development.

Toyota investing $1 billion in Mexico plant

Toyota has announced plans to build a new factory in Mexico. The site, to be located in the state of Guanajuato, is set to open in 2019 following an investment of about $1 billion. The plant will be the first to make use of the Toyota New Global Architecture, and will (at least initially) focus on production of the Corolla. The compact sedan will continue being built in the United States at the Blue Springs, MS, site, consolidating Corolla production in the south. However Toyota's site in Ontario, Canada, will shift to "mid-sized vehicles of higher value," alongside the plants in Kentucky and Indiana, the automaker said. The Guanajuato site will be Toyota's second Mexican plant, joining the Tijuana plant that assembles the Tacoma – soon to ramp up to 89,000 units per year. Once the new Guanajuato plant comes on full steam, it is slated to produce around 200,000 units per year. It'll be the first site Toyota will open worldwide since it began focusing on utilizing the production capacity it already has. With 90 percent of its production capacity now in use, the Japanese auto giant is also planning to broaden its joint venture with Guangzhou in China as well. Toyota Invests in Competitive Plants - Emphasis on Sustainable Growth Strategy - New plant in Mexico and expansion of its GTMC joint venture in China Toyota City, Japan, April 15, 2015 - Toyota announced today that it will build a new plant in Mexico and expand its joint venture, Guangzhou Toyota Motor Co., Ltd. (GTMC), in China. These investments are grounded on its plans to construct production lines that are more competitive, with greatly reduced initial investment, improved efficiency, flexibility, environmental performance and safety. These "simple and slim" production lines can be easily lengthened or shortened depending on demand. Over-head conveyance devices are eliminated, compact equipment is installed on top of the plant floors, and paint-booths are smaller. The new plant in Mexico and the expansion in China will be designed to accelerate innovation by implementing these new technologies into real production lines. With today's announcement, Akio Toyoda, President of Toyota Motor Corporation said "This investment represents our long-held principles of continuous improvement and challenging ourselves to always do better. An increase in production does not mean an undisciplined pursuit of more. Toyota's expansion must be driven by providing ever-better-cars and our talented people.