1999 Toyota Camry 4cylinder Automatic No Reserve Auctio on 2040-cars

Auto blog

Post-earthquake, Toyota prepares to reopen some plants in Japan

Toyota will restart vehicle production at most of its closed factories in Japan next week, but the factories that build the Mirai and many Lexus models will remain closed through at least April 28 and possibly longer. The earthquakes around the city of Kumamoto on the island of Kyushu forced the automaker to stop most of its assembly throughout the country due to a lack of parts supply. Toyota will reopen the plants in phases from April 25 to 28. However, the Motomachi factory with its LFA works, which makes the Mirai, and the Miyata factory will remain closed. These sites also build the Lexus NX, RX, ES, GS, and CT, according to Toyota. The automaker didn't say when production would begin again or how this would affect vehicle supply. "In the update, we received this morning from TMC, they said that at this stage it is too soon to tell what the impact on production will be, so we can't say yet whether there might be vehicle shortages in the US," spokesperson Aaron Fowles told Autoblog. While the quakes were focused on Kyushu, they damaged Aisin Seiki factories, which supplied parts to Toyota plants across the country. The automaker worked with its partner to import the necessary components from China and Mexico, and Aisin started moving molds from the damaged plants to operational ones in Japan, which gets production under way sooner. Automotive News Europe estimates the week of lost production cuts total assembly by 90,000 vehicles. It could cost Toyota the equivalent of $458.2 million to $641.5 million. The company could make up some of the losses through overtime. Toyota says these plans are subject to change because on ongoing tremors in the region, which could cause more damage. Reuters reported there was a magnitude 5.5 aftershock in the Kumamoto area on April 19. So far, the quakes have killed at least 47 people and around 100,000 people have moved to evacuation centers. Toyota to Restart Production on Vehicle Assembly Lines in Japan from April 25 Apr. 20, 2016 Toyota City, Japan, April 20, 2016-Between April 25 and 28, Toyota will restart production on most of its vehicle assembly lines in Japan. On April 17, Toyota announced that, due to parts shortages resulting from the severe earthquakes that struck Japan's island of Kyushu last week, production would be suspended on almost all of its vehicle assembly lines in stages between April 18 and 23.

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Autoblog Podcast #394

Episode #394 of the Autoblog Podcast is here, and this week, Dan Roth, Steven Ewing, and Michael Harley talk about the possibility of a supercharged Dodge Viper, the Chevrolet Silverado Rally Edition, the newly released supercharger kit for the Honda CR-Z, and rumblings of an Alfa Romeo 6C. We start with what's in the garage and finish up with some of your questions, and for those of you who hung with us live on our UStream channel, thanks for taking the time. Check out the rundown below with times for topics, and you can follow along down below with our Q&A. Thanks for listening! Autoblog Podcast #394: The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics: Supercharged Viper Chevrolet Silverado Rally Edition Honda CR-Z Supercharged Alfa Romeo 6C In The Autoblog Garage: 2014 Ford Fiesta SE 2015 Cadillac Escalade 2015 Toyota Tundra TRD Pro 2015 Audi A8 L TDI Hosts: Dan Roth, Steven Ewing, Michael Harley Runtime: 01:32:30 Rundown: Intro and Garage - 00:00 Supercharged Viper - 44:25 Chevrolet Silverado Rally Edition - 55:19 Supercharged Honda CR-Z - 01:00:52 Alfa Romeo 6C - 01:07:29 Q&A - 01:13:41 Get the podcast: [UStream] Listen live on Mondays at 10 PM Eastern at UStream [iTunes] Subscribe to the Autoblog Podcast in iTunes [RSS] Add the Autoblog Podcast feed to your RSS aggregator [MP3] Download the MP3 directly Feedback: Email: Podcast at Autoblog dot com Review the show in iTunes