2014 Toyota Avalon Xle on 2040-cars

Auto blog

Renault Scenic EV takes first place as (European) Car of the Year

The automobile awards season may not be over, but two of the more prestigious annual races came closer to a climax this week. One might need a scorecard to keep track. We’re focused here on two events: the World Car of 2024, now reduced to three finalists in six categories. Then thereÂ’s the Car of the Year, known in some quarters as the European Car of the Year. Except that the car doesnÂ’t have to be European to win, only sold there. Got that? Winners out of the way first: At the Geneva Motor Show on Monday, the Renault Scenic E-Tech all-electric has been voted Car of the Year 2024. The Scenic is a fairly compact, somewhat stylish SUV for Europe only, and is the seventh vehicle from the French brand to win the award. It sells in the United Kingdom for about $47,500. The other six finalists that had made the first cut of voting in November were the BMW 5 Series, BYD Seal, Kia EV9, Peugeot E-3008/3008, Toyota C-HR, and Volvo EX30. The trophy winner was chosen by a jury of 59 motoring journalists from 22 countries. Scenic came in first place with 329 points. The Seal was the first Chinese-made car to make this awardÂ’s shortlist; it finished sixth out of seven, just up from the Toyota. One judge explained his decision to grant the Seal zero votes. Writing in Top Gear, Paul Horrell wrote this entertaining critique: “It looks good and is well specified, so makes a strong market entry. The advanced electric system and cobalt-free battery are commendable too, and it's enjoyable enough to drive quickly. That's undermined by an agitated ride over bumps, and the logic of screens and switches is pretty eccentric.” Recapping the World Car of the Year 2024 update, the sponsors shared the stage at Geneva on Monday with the Europeans as well, although they revealed only the top three finalists in six categories. For the ultimate prize, they are the Kia EV9, the Volvo EX30 and the BYD Seal. The winners will be announced March 27 at the New York International Auto Show. Here's more on the World Car finalists. By the Numbers Geneva Motor Show New York Auto Show BMW Kia Toyota Volvo Peugeot Renault Green Automakers Best Cars

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota won't face recall for Corolla unintended acceleration

Toyota will not face a recall or further investigation into an alleged unintended acceleration problem in the 2006-2010 Corolla. Following months of analysis, the National Highway Traffic Safety Administration was unable to find a mechanical defect to cause the issue. If there had been a safety campaign to fix the vehicles, it could have affected 1.69 million cars, according to NHTSA. The incident that prompted the investigation occurred in June 2014 when a driver was pulling into a parking spot. The 2010 Corolla allegedly lurched forward under braking and hit an unoccupied Jeep, according to The Detroit News. No one was injured. The owners had the vehicle examined by a Toyota dealer, and it found no problems. They then filed a petition with NHTSA to open a deeper investigation. NHTSA took the family's Corolla and tested it for over 2,000 miles, according to The News. The agency couldn't replicate the problem and found the brakes were capable of keeping the vehicle from moving at full throttle. In their petition, the owners also submitted 143 other unique complaints of this issue in the Corolla, but the Feds found that most of these incidents were due to driver error where the gas or both pedals were accidentally pressed. After taking all of this into account, "NHTSA has concluded that further investigation of the issues raised by the petition is not warranted," the agency wrote in its report. You can read the entire, 23-page explanation for yourself in PDF format, here. INVESTIGATION Subject : Low-speed surging Date Investigation Opened: SEP 19, 2014 Date Investigation Closed: APR 29, 2015 NHTSA Action Number: DP14003 Component(s): VEHICLE SPEED CONTROL All Products Associated with this Investigation Vehicle Make Model Model Year(s) TOYOTA COROLLA 2006-2010 Details Manufacturer: Toyota Motor Corporation SUMMARY: The Agency received a petition on September 11, 2014 requesting an investigation into, "low-speed surging in the 2006-2010 Toyota Corolla [vehicles] with ETCS-i, in which the brakes fail to stop the vehicle in time to prevent a crash." NHTSA conducted a technical review of the material cited and provided by the petitioner, material Toyota submitted in response to a NHTSA formal request, interviews with complainants and manufacturer representatives, as well as the results of testing of the complaint vehicle.