2007 Toyota Tundra Limited 4wd Power Sunroof Heated Seats on 2040-cars

Auto blog

IIHS: Drivers safer than passengers in frontal crash test

The Insurance Institute for Highway Safety introduced a small overlap frontal crash test in 2012 that replicates what happens when the front corner of a car impacts another object. In the test, vehicles travel at a speed of 40 mph toward a five-foot-tall barrier with 25 percent of the total width of the car striking the barrier on the driver side. One would assume that vehicles with good small overlap front ratings would protect the driver and the passenger equally. But a recent study from the IIHS proves that passengers aren't as protected as drivers. The IIHS conducted the test on seven small SUVs with good driver-side small overlap ratings and only one of the vehicles, the 2016 Hyundai Tucson, performed well enough to be given a good rating. The other SUVs performance ranged from poor to acceptable. After reviewing the results of the test, the IIHS is deliberating whether it should institute a passenger-side rating as part of its Top Safety Pick criteria. "This is an important aspect of occupant protection that needs more attention," states Becky Mueller, lead author of the study and an IIHS senior research engineer. "More than 1,600 right-front passengers died in frontal crashes in 2014." Since the small overlap front test was introduced, 13 automakers have made structural changes to 97 vehicles with roughly three-quarters earning a good rating after the adjustments. The IIHS' test for frontal ratings is completed with a dummy in the driver's seat and with a barrier overlapping the driver's side. Which makes sense, as passengers aren't always riding in a vehicle. "It's not surprising that automakers would focus their initial efforts to improve small overlap protection on the side of the vehicle that we conduct the tests on," states David Zuby, IIHS executive vice president and chief research officer. "In fact, we encouraged them to do that in the short term if it mean they could quickly make driver-side improvements to more vehicles. As time goes by, though, we would hope they ensure similar levels of protection on both sides." As the IIHS' test revealed, there's a massive difference in safety between the two front seats. Increase passenger safety, according to Mueller, would require automakers to strengthen the occupant compartment by using a different type of material or by making it thicker.

Toyota GT86 engineer Tada recounts how sports car came to be

Because the Toyota GT86, Scion FR-S and Subaru BRZ coupes are now a reality, it's almost hard to imagine the struggle that had to happen within the large, conservative corporate structures at both automakers for the joint project to even get off of the ground.
Speaking to those struggles on Toyota UK's Toyota Blog, GT86 Chief Engineer Tetsuya Tada enlightens us with a recap of the sports car's earliest origins. For Tada, the first stages of the project must have seemed almost as dreamlike as the final product is to drive.
Said the Chief, "I had been working in the minivan department engineering new product, but a month after the meeting I was summoned. 'Forget about minivans,' they said, 'you are now working on the sports-car project.'"

See how Toyota Mirai hydrogen fuel cell car is made [w/videos]

Toyota kicked off production of the Mirai hydrogen fuel cell sedan at its Motomachi factory campus in December, and at the time the company had orders for 200 of them. In just the few months since then, demand has already jumped to requests for at least 1,500 of the potentially revolutionary vehicles. For the first time, the Japanese brand is taking viewers into the innovative model's production process and showing the sedate pace of putting them together. The line used for the Mirai was formerly home to Lexus LFA production. Like that low-volume, cutting-edge supercar, Toyota is prioritizing quality and precision for its fuel cell vehicle. At the moment, it's building just three of the sedans per day with a tight, dedicated team. According to Automotive News, there are just 13 people assembling the cars right now, and at most they could only complete 10 per day. The production process for the Mirai is more akin to a boutique sportscar than the high-volume efficiency Toyota usually shows. There's no belt moving them along, and instead each one is pushed between areas. With so much riding on these models, this approach is meant to guarantee an attention to quality. "These facilities are not so advanced. Rather, we rely on the work of our skilled employees. This is similar to how things were when Toyota was just starting out," said Toyota President Akio Toyoda during a ceremony at the plant, according to Automotive News. Toyota has released a gallery of images and five videos showing the major steps in the Mirai's production process, including the complicated installation of the fuel cell stack. All of the clips are embedded below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.