2001 Tacoma Trd Sr5 Xtra Cab 4x4 Fully Loaded!!!! on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2016 Toyota Tacoma teased again

Toyota is following up its muddy teaser of the back of the 2016 Tacoma with a dusty new one that shows the truck's face for the first time. Without seeing more of the pickup, it's impossible to make any educated judgments, but the company appears to be taking the Taco's styling in a new direction. The 2016 Tacoma features a hexagonal grille outlined in chrome and a narrow intake underneath visually connecting the foglights. The headlights take on a squinting look, and this shot suggests LED running lights at the outer edge (perhaps just for top-level trims). You can also just make out a bit boxier of a flare for the front fender. The truckmaker hasn't announced anything about the Tacoma's powertrain, but we spied a prototype testing several months ago with a six-speed manual transmission. That one reportedly rode on a modified version of the current model's frame, as well. Toyota apparently has high hopes, though, because it's ramping up production at the Taco's factory in Mexico by 41 percent. The truck debuts at the 2015 Detroit Auto Show on January 12, and you can read Toyota's to-the-point press release about it below. See. The. Light. December 17, 2014 The lights come on and Tacoma rolls at the 2015 North American International Auto Show. The all-new 2016 beast hits the stage at 12:50 p.m. EST, Monday Jan. 12. And for those who can't wait for the dust to settle, we'll share a little more dirt later today. www.toyota.com/upcoming-vehicles/tacoma

Camatte concept puts the Toy back in Toyota [w/videos]

It's been two years since Toyota first revealed its Camatte show car at the Tokyo Toy Show. Though sadly never destined for production, Toyota brought the concept back the following year as the Camatte 57s roadster, and is now returning to the same show with yet another take on the kid-friendly, configurable 1+2 with interchangeable body panels - this time with a slew of features that are fresh not only to the concept itself, but to the industry altogether.
This year the Camatte is being showcased in two forms: a bare chassis in the Tech Lab that lets kids see the inner workings of a modern automobile, and another in the Design Lab that lets kids draw their own motif for the concept that is then displayed on an LED hood.
The overall approach reminds us of the way Toyota's budget brand Daihatsu unveiled the Kopen roadster concept at the Tokyo Motor Show late last year, only even more kid-focused and decidedly more light-hearted than you might otherwise expect from one of the largest industrial giants in the world, and could only have been made for a toy exposition. In Japan. Which would explain the ridiculously upbeat videos below, where you'll also find the brief press release.