Sienna Xle Power Lumbar Support 3rd Row Seating Disc Changer on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota ready to design more heart-racing Prius

Long praised for its fuel economy and reliability, the Toyota Prius has been no stranger to less-than-flattering remarks about its styling and sense of excitement. In fact, the model is a regular movie punchline. For evidence, see Mark Wahlberg in The Other Guys or, more recently, Ice Cube in Ride Along. Apparently, Toyota President Akido Toyoda is getting the message and is pushing for what's been translated as a more "heart-racing" design for both the Prius and the Camry, the Canadian website Driving says. The Camry and Prius accounted for about a third of Toyota's US sales last year. With the Camry as the best-selling US model for each of the last dozen years, Toyota US head designer Kevin Hunter noted at the Detroit Auto Show last week that the Japanese automaker is looking for a "more emotional" design for the boxy sedan. The Prius redesign may have more constraints, as aerodynamics have to be factored in to ensure top-line fuel economy for the world's best-selling hybrid. Toyota used the Detroit show to show off the FT-1, a concept that many consider a preview of the new Supra. How this "Future Toyota 1" will affect the Prius and Camry redesigns, whenever they appear, remains in question but we like where things are headed.

Toyota adds 1.6m cars to Takata inflator recall list

As part of the Takata airbag inflator recall expansion announced by NHTSA earlier this month, Toyota has listed an additional 1.6 million cars that will need to have inflators or airbag assemblies replaced. This brings the total of recalled Toyota, Scion, and Lexus vehicles to 4.73 million. Other automakers will announce their expanded recall lists this week as well. This round of recalls affects some but not all vehicles with the following model names and years: 2009–2011 Toyota Corolla and Matrix 2006–2011 Toyota Yaris 2010–2011 Toyota 4Runner 2011 Toyota Sienna 2008–2011 Scion xB 2007–2011 Lexus ES 2010–2011 Lexus GX 2006–2011 Lexus IS To see if your specific vehicle falls under recall, write down your VIN and go to toyota.com/recall; you can also check any recalls, Takata or otherwise, at safercar.gov/vin. Toyota will inform owners of affected vehicles by mail. Depending on the model, either the inflator or the entire airbag assembly will have to be replaced. Due to the number of vehicles that have already been recalled, it may take some time for the necessary parts to be available. A total of 11 deaths have been attributed to the faulty Takata inflators, and federal investigators now know why the parts are prone to failure. The state of Hawaii was the first to sue the auto supplier, with more states expected to follow. The 17 other automakers are required to announce their additions resulting from the May 4 expansion this week, so expect more of the 35 to 40 million vehicles to be listed soon. Related Video: Image Credit: Reuters Recalls Lexus Scion Toyota Takata airbag recall lexus is toyota sienna toyota 4runner toyota matrix lexus es lexus gx