2007 Toyota Prius Electric/hybrid * Back Up Camera * Up To 60mpg *no Reserve on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota recalling FJ Cruiser due to excessively bright headlights

Now, hold on. This recall isn't quite as serious as it sounds. Yes, Toyota is recalling 11,489 FJ Cruiser models from the 2007 to 2013 model years, and yes, it's because the vehicles, as the National Highway Traffic Safety Administration states, "fail to conform to Federal Motor Vehicle Safety Standard No. 108, 'Lamps, reflective devices, and associated equipment.'" But read the fine print and you'll see the catch: This recall is only for vehicles fitted with the automaker's auxiliary lighting kit that can be mounted to the front bumper.
Basically, the auxiliary lamp assemblies use 55-watt bulbs, and when these are turned on in conjunction with the upper beam headlamps, it's a pretty blinding sight. NHTSA states that excessively bright lights can blind other drivers, increasing the risk for a crash.
To remedy the situation, Toyota will replace the 55-watt bulbs with cooler 35-watt units. The recall is expected to begin later this month. Scroll down for the full details in the NHTSA report.

Watch this dude paint his Toyota pickup like Eddie Van Halen's guitar

Eddie van Halen is one of the greatest rock musicians around, and his Eruption guitar solo alone puts him in the pantheon with the best of the best. Artist Ryan Humphrey was looking for a design to repaint his ratty Toyota pickup, and as a Van Halen super fan, he set on the classic scheme of Eddie's guitar for the look. The paint job is made up of a crisscrossing geometric pattern of black and white stripes with a red body. The eye-catching, rock-inspired design should give Humphrey no problems finding his pickup in a parking lot. In a video hosted by Plutonium Paint, he shows you how to get the look using the company's product. Even if you're not interested in watching a guy paint his old truck, the video is still enjoyable just for the chance to listen to some Van Halen tunes.