2005 Toyoda Prius on 2040-cars

Auto blog

Does Scion's LA concept presage a US Auris?

When the doors open at the LA Auto Show in a few weeks, Scion will be on hand to showcase its new iM Concept. But considering what little Toyota's youthful brand has revealed about the concept so far, it's led to rampant speculation. And the prevailing wisdom seems to point towards a production iM arriving as a Scion-badged version of the Toyota Auris.
For those unfamiliar, the Auris is to European (and other) markets essentially what the Matrix is (was?) to ours: a hatchback version of the Corolla. The model line was first introduced in 2006, looking in its first iteration like an overgrown version of the contemporary second-gen Yaris, and was replaced with the current model in 2012. It's available as a five-door hatch or wagon, with a range of gasoline, diesel and hybrid powertrains available.
If the rumors - spurred by the similarity of the iM concept's nose depicted in the teasers - prove accurate, and public reception to the idea ends up spurring Toyota to put it into action, it wouldn't be the first overseas Toyota brought over as a Scion. The Scion iQ was sold as the Toyota iQ overseas years before it arrived here.

130,000 Toyota Tundra pickups recalled over airbag issue

Toyota is announcing a recall for about 130,000 examples of the 2014 Tundra Tundra pickup in Crew-Max Cab and Double Cab configurations.
According to the company, the "garnish on the center pillars" inside the trucks might not have been installed correctly. If the vehicle were in an accident, the side curtain airbags could deploy in the wrong shape. Toyota says that it's not aware of any crashes, injuries or fatalities related to this potential problem.
To fix the issue, the pickups will have their interior center pillars inspected, and if faulty, the pieces will be replaced. Obviously, this will be done at no cost to owners. Scroll down to read the full announcement.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.