2014 Toyota Prius Two on 2040-cars

Auto blog

Toyota TRD Pro Chase Trucks are ready to hit the desert at SEMA

Toyota marks the 35th anniversary of its Toyota Racing Development performance arm this year, and the division is celebrating at this year's SEMA Show with a quartet of tuned off-roaders based on on the 4Runner, Tacoma and Tundra that look more than ready to go just about anywhere.
All four of them will take part in this year's Baja 1000 race, but only the Tundra (far left in the above photo) is actually competing. The other three will be there to act as support vehicles.
Inspired by the production TRD Pro Series trucks, the 4Runner, Tacoma and Tundra are prepared by off-road fabricator N-Fab with a mix of TRD and the company's own parts to be able to take whatever the grueling, 1,000-mile can throw at them. The trio is fettled with extra communications equipment, GPS, additional lights and all sorts of body and suspension modifications to help them survive the ordeal.

2019 Toyota Sienna AWD vs 2018 Chrysler Pacifica Hybrid | New meets old

The Toyota Sienna has always been an inconspicuous van. They're out there, there's a lot of them and they're huge, but they blend in with darn near everything. Perhaps Toyota noticed that a little while ago and slapped on the slightly garish grille/not a grille plastic thing in the front bumper, but it still doesn't really stand out. On the other hand, our long-term Chrysler Pacifica Hybrid, which is a great deal newer than the Sienna, has slick styling that gets noticed. Toyota hasn't properly redesigned the Sienna since the 2011 model year, and it shows on every front. Despite its many shortcomings, there are still some valid arguments for going with the dinosaur. Ride and handling Of all the reasons to choose a Sienna over the much newer competition, available all-wheel drive has to be the main one. My tester was so equipped, and I got a chance to test it out in both snow and ice. Obviously, the first thing I did in powder was see if the rear end would break loose. I can confirm that with traction control off, the Sienna will slide around a little bit. You won't be doing any sick drifts, but it's undoubtedly more fun than our Pacifica. The Chrysler is fitted with Nokian Hakkapelitta winter tires. As you might guess, this means that braking and grip around corners is better than the Sienna in snow. If the Sienna were to ditch its slippery all-seasons for a proper set of winters, it would be running circles around the Pacifica. Still, I drove our Pacifica through a lake effect blizzard in Buffalo and it never blinked from lack of traction with multiple inches of snow on the ground. Some folks are going to want the assurance of all-wheel drive, and the Sienna will offer it, but don't make it your only option. All-wheel drive might help you get going, but winter tires are there to save the day when sledding gets tough. What impressed most about the Sienna was its ride quality and composure. This van earned its road warrior status on my drive to the Chicago Auto Show from Detroit. The long highway trek was handled without issue by the big minivan chassis. Bumps and road imperfections were soaked up well. Noise wasn't much of an issue either, something minivans can struggle with given the massive amount of space in the cabin ripe for vibrations and rattles. However, an uncomfortable seat led to some soreness after over four hours in the saddle. No matter how I adjusted the lumbar, it didn't seem to take to my 5'10" slim frame.

Toyota retires robots in favor of humans to improve automaking process

Mitsuru Kawai is overseeing a return to the old ways at Toyota factories throughout Japan. Having spent 50 years at the Japanese automaker, Kawai remembers when manual skills were prized at the company and "experienced masters used to be called gods, and they could make anything." Company CEO Akio Toyoda personally chose Kawai to develop programs to teach workers metalcraft such as how to forge a crankshaft from scratch, and 100 workstations that formerly housed machines have been set aside for human training.
The idea is that when employees personally understand the fabrication of components, they will understand how to make better machines. Said Kawai, "To be the master of the machine, you have to have the knowledge and the skills to teach the machine." Lessons learned by the newly skilled workers have led to shorter production lines - in one case, 96percent shorter - improved parts production and less scrap.
Taking time to give workers the knowledge to solve problems instead of merely having them "feed parts into a machine and call somebody for help when it breaks down," Kawai's initiative is akin to that of Toyota's Operations Management Consulting Division, where new managers are given a length of time to finish a project but not given any help - they have to learn on their own. It's not a step back from Toyota's quest to build more than ten million cars a year; it's an effort to make sure that this time they don't sacrifice quality while making the effort. Said Kawai, "We need to become more solid and get back to basics."