1994 Toyota Previa Dx 3-door 2.4l on 2040-cars

Auto blog

Recharge Wrap-up: Toyota Prius airbag recall, Peugeot launches eU01s e-bike

Toyota is recalling 7,600 Prius vehicles for an airbag issue. Certain examples of the 2016 Prius could have malfunctioning inflators that could cause the passenger side airbags to deploy accidentally. There are no known injuries from the faulty airbags, but Toyota says, "This has been observed when the vehicle is parked and unoccupied for a period of time." Toyota also says this issue is unrelated to the massive recall of airbags supplied by Takata. The automaker will contact affected owners to arrange free repairs. Read more at Automotive News. Peugeot is adding another e-bike to its portfolio with the eU01s. What sets this electrically assisted bicycle apart from both regular bikes and other pedelecs is its ability to propel the bike to 28 mph under electric power. It comes with either a 400- or 500-Wh lithium-ion battery, providing 47 or 59 miles of range, respectively. It also offers an optional on-board computer with its 4.3-inch screen, through which riders can customize the electric assistance, get directions, receive sports coaching, and connect their smartphone. Earlier this year, Peugeot also launched its e-Kick scooter and folding eF01 e-bike. Read more at Green Car Congress. BYD is expanding its manufacturing facility in the US. In the second of three phases for the plant, BYD is adding onto its factory in Lancaster, California, where it currently builds electric buses. The Chinese company plans to triple the number of employees, up from the current 400, as it expands the facility by 40,000 square feet. BYD plans to build medium- and heavy-duty trucks at the plant, but declined to comment on whether it has plans to build light-duty vehicles there. Read more at Automotive News. The German states of Hesse and Baden-Wuerttemberg are suing Volkswagen over the Dieselgate scandal. The states are joining other investors seeking damages over losses incurred because of the automaker's emissions cheat device. Hesse Finance Minister Thomas Schaefer said the scandal cost the state about $4.4 million in stock losses, while Baden-Wuerttemberg likely lost closer to $450,000. Bavaria said earlier that it would sue Volkswagen on behalf of its pension fund for civil servants, which lost around $780,000. Read more from Automotive News Europe.

There's a familiar ring to this 1966 video of GM's hydrogen ElectroVan

"What we need is fuel cells that can run on a hydrocarbon fuel and air." It can be fun and educational to revisit the past as we look into the future. While we do have cars that plug in today, the first big batch of hydrogen powered vehicles is not yet arrived (but the Hyundai Tucson Fuel Cell CUV is leading the way). The idea of hydrogen as a promising future technology was also true in 1960s, when General Motors made a promotional movie for the ElectroVan. Turns out, the future then shared more than a little with the future now. As you can see in the short promotional video below for the hydrogen-powered ElectroVan, a modified 1966 GMC HandiVan, a big hurdle in the mid 1960s was the difficulty of obtaining hydrogen fuel. GM offered a possible solution at the time: "Hydrogen and oxygen are expensive and impractical fuels for a car. What we need is fuel cells that can run on a hydrocarbon fuel and air." Unlike today's hydrogen fuel cell cars, the ElectroVan used liquid hydrogen-oxygen fuel cells to get a range of between 100 and 150 miles. Not bad for the first hydrogen fuel cell-powered vehicle in the world. GM tested the ElectroVan on the GM grounds before sending it into storage and then to the company's heritage center. For another view to the past, this time with some focus on electric vehicles, take a look at a video from the 1994 Chicago Auto Show, also available below. Twenty years ago, the green vehicle hype was on the Toyota EV-50 electric car, the solar-powered Honda EVX (and a solar Honda racing car) and a hydrogen-powered Mazda Miata. The announcer's enthusiasm is contagious, but as we all know, none of these vehicles ever made it to dealerships. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Chicago Auto Show, Bangshift via YouTube Green GM Toyota Technology Emerging Technologies Electric Hydrogen Cars Videos

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.