1988 Toyota Land Cruiser Fj62, 4.0l on 2040-cars

Auto blog

Toyota launches new Passo hatchback in Japan [w/video]

With considerable manufacturing capacity here in the United States and even a NASCAR program, it'd be all too easy to categorize Toyota as an American automaker. Only it's not. It's Japanese, of course. And back in the Japanese Domestic Market, it offers a whole range of models we'll never see in North America. Models like the Crown sedan, Noah minivan and this, the new Passo hatchback.
Sold in various markets as the Daihatsu Boon, Daihatsu Sirion, Perodua Myvi and (for a time) the Subaru Justy, the Toyota Passo is a compact hatchback that slots in size-wise between the Yaris sold in America and the Aygo offered in Europe (except the Passo is taller than either).
Power comes from a 1.0-liter engine with 69 horsepower that can be had in front- or all-wheel drive, or a 1.3 driving 95 horses to the front wheels alone. A continuously variable transmission is on duty regardless of engine choice. Front-drive models get a stop/start system, but even all-wheel-drive versions are eligible for government tax credits. That's because, though the new Passo only appears to be mildly updated, the engines have been thoroughly reworked to deliver 30-percent better fuel economy than the previous model, coming in 20-percent better than the standards being enacted by the Japanese government for next year.

VW Finds CO2 'Irregularites', SEMA Recap, and More | Autoblog Minute

Volkswagen's diesel emissions scandal gets a new wrinkle, US regulators hit Takata Corporation with a substantial fine, and we head to Vegas for a look at tuner paradise at the 2015 SEMA show. Autoblog Senior Editor Greg Migliore reports on this edition of Autoblog Minute Weekly Recap. Acura Chevrolet Honda Mazda Mitsubishi Toyota Autoblog Minute Videos Original Video Acura Legend

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.