2012 Toyota Highlander V6 Certified 3.5l One Owner Clean Car Fax on 2040-cars

Auto blog

2017 Scion FR-S getting slight power bump?

A common refrain when discussing the Scion FR-S and its sibling the Subaru BRZ is that they are capable vehicles but are in need of more power. The latest rumors suggest that some more muscle might finally be on the way for the coupe's refresh. Don't expect something like the STI Performance Concept with a 300-horsepower, turbocharged flat-four, though – the gains in the real world are likely to be significantly more modest. According to Toyota insiders speaking with Motoring in Australia, the local Toyota GT86 (our FR-S) is due for a styling and powertrain refresh for the next model year. The 2.0-liter boxer four-cylinder engine isn't expected to get a drastic power increase, but it's not being completely neglected. A new intake manifold and friction reductions reportedly allow for five percent more grunt. If accurate, and if the changes also come here, that would take output of the US version to 210 hp and 159 pound-feet of torque. The adjustments could improve fuel economy by seven percent, as well. Handling is already a forte for the FR-S and BRZ, and things could get even better with this refresh. Motoring claims that dampers from Sachs might become standard equipment, along with a reinforced subframe. The close relationship with the BRZ reportedly rules out any dramatic changes to the styling for this update. However, the coupe is still likely to wear a new hood with vents in it, reshaped headlights, and a revised fascia with a larger lower grille. At the rear, expect a rear diffuser and exhaust pipes at the corners. While minor compared to all of these rumored updates, Scion recently gave the FR-S a few tweaks in the US for the 2016 model year (pictured above). In addition to some new colors and interior trim, it now comes standard with a seven-inch touchscreen infotainment system and rearview camera.

These are the cars most likely to be damaged in an accident

Data from Insurify shows which models have the most accident-prone drivers behind the wheel. It also shows the proportion of the drivers of said vehicles with an at-fault accident on record in the past seven years, based on Insurify’s analysis of over 4 million car insurance applications. For reference, the national average is 10.78%, and each of these vehiclesÂ’ drivers represent a statistically significant increase over that. Now, it would be easy to infer that these cars are dangerous, but such is not necessarily the case. Remember, drivers cause accidents, not cars. These just happen to be the cars that accident-prone drivers drive. YouÂ’ll notice that many are mainstream, affordable cars, often with decent crash ratings. Also keep in mind that vehicle accidents are up since the beginning of the pandemic, so no matter what you drive, please drive safely. 10. Hyundai Ioniq This affordable, electrified vehicle platform sneaks into this list with 14.45% of drivers with a recent at-fault accident on record. 9. Lexus CT Another hybrid, this Prius-powered Lexus beats the national average at 14.57%. 8. Toyota Prius V Yet another hybrid, the larger but discontinued member of the Prius family sees 14.72% of its drivers with recent accidents. 7. Mazda CX-3 The Mazda CX-3, which is discontinued for the 2022 model year, sees the accident-prone making up 14.9% of its drivers. 6. Infiniti Q60 The second and final luxury car on this list has more accident-prone drivers than average, at 14.93%. 5. Subaru Impreza The first of two Subarus on this list has 15.1% of drivers with recent accidents on record. 4. Hyundai Genesis Coupe The Genesis Coupe was only on the market for a brief span before it was discontinued and Genesis spun off into its own luxury brand. That said, it too beats the national average for accidents, at 15.29%. 3. Subaru WRX Despite its standard all-wheel drive, the boy-racer WRX has 15.44% of drivers with a prior accident in the last seven years. 2. Kia Stinger We love the Kia Stinger, and had great luck with our long-termer that graced the Autoblog garage for a year. That said, 15.75% of its drivers represent have a recent accident on record. 1. Scion FR-S This fun two-seater attracts the most accident prone drivers, with 15.87% with recent at-fault crashes. Related video:

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.