2022 Toyota Corolla Se on 2040-cars

Auto blog

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017

An early gas-electric hybrid was developed by...Exxon?

We're not sure which aspect of Exxon's 1970s-era efforts to develop advanced and electrified powertrains is the most ironic. There's Exxon, that of the Valdez oil spill infamy, being on the leading edge of hybrids and electric vehicles. There's a boat-like Chrysler Cordova getting 27 miles per gallon. And there's the central role a Volkswagen diesel engine plays in that hybrid development. It's all outlined in an article (linked above) by Inside Climate News, and it's an amusing read. Flush with cash and fearing what it thought was peak oil production in the 1970s, Exxon funded a host of new ventures divisions geared to find alternatives to gas-powered powertrains. In the early 1970s, Exxon lured chemist M. Stanley Whittingham to develop what would become a prototype of a lithium-ion rechargeable battery. Then, in the late 1970s, Exxon pioneered the concept of using an alternating-current (AC) motor as part of a gas-electric hybrid vehicle. The company retrofitted a Chrysler Cordova (yes, that's the model Ricardo Montalban used to hawk) with a powertrain that combined 10 Sears Die-Hard car batteries, an alternating current synthesizer (ACS), a 100-horsepower AC motor, and, yes, a four-cylinder 50-horsepower Volkswagen diesel engine. The result was a rather large two-door sedan that got an impressive 27 mpg. And while US automakers didn't see the potential in the early concept, in 1980 Exxon and Toyota began collaborating on a project that would involve retrofitting a Toyota Cressida with a hybrid engine. That car was completed in 1981, and may have been one of the seeds that eventually helped sprout the concept of the Toyota Prius. Soon after rebuilding the Cressida, Exxon would get out of the advanced-powertrain-development business, as oil prices began to fall in the early 1980s, spurring cost-cutting measures. Cry no tears for the Exxon, though, as what's now known as ExxonMobil is the largest US oil company. Related Video: News Source: Inside Climate NewsImage Credit: Spencer Platt/Getty Images Green Read This Chrysler Toyota Electric Hybrid battery

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.