2000 Toyota Celica Gts Hatchback 2-door 1.8l on 2040-cars

Auto blog

Recharge Wrap-up: Minnesota first to require biodiesel, maglev in Israel, Toyota FCV in Aspen

A new Minnesota law that requires biodiesel blends goes into effect in just a few days, says KELO. Diesel drivers in Minnesota will be pumping soybeans into their tank beginning July 1. Every year, diesel will be sold as a B10 blend (ten percent biofuel) from April through August, and will scale back to a cold-hardy B5 blend from September through March. The biofuel largely comes from soybean crops grown within Minnesota, and the biodiesel industry pumps more than $900 million into the state economy every year. According to the National Biodiesel Board, using the B10 and B5 blends will reduce greenhouse gas emissions by 1,342,000,000 pounds every year. Minnesota is the first state to require diesel to be sold as a biofuel blend. In Japan, Isuzu Motors and Japanese biotech venture Euglena are teaming up to create biodiesel using algae, according to Bloomberg Businessweek. The goal is to create a new type of fuel that doesn't need to be mixed with light oil to be used in engines. "As long as we use light oil for diesel engines, emissions of carbon dioxide are inevitable," says Isuzu president Susumu Hosoi. Euglena has also been using algae to develop jet fuel with airline operator ANA Holdings. Isuzu and Euglena hope to have the new biodiesel developed by 2018. Aerial maglev transportation is coming to the campus of a defense contractor in Tel Aviv, Israel, Wired reports. The SkyTran personal rapid transit system uses small pods on an elevated magnetic track to move people from place to place. The pilot program will see SkyTran come to the corporate campus of Israel Aerospace Industries as soon as next year. The pods are hailed by phone, and carry passengers along the magnetic rail system at speeds of up to 44 miles per hour. The passive magnetic system levitates the pod attachment a centimeter above the rails, while a burst of electricity propels the pod forward. If the test at the campus goes well, SkyTran could spread to Tel Aviv at large, moving up to 12,000 people per track per hour with top speeds of 150 mph. The pre-production prototype of the Toyota FCV will make its North American debut at the 2014 Aspen Ideas Festival on Friday, June 27. The hydrogen car's finished exterior was revealed in Japan on Wednesday along with its nearly $70,000 price tag. It will go on sale in Japan by April of next year, and will come to Europe and California in the summer of 2015.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Camatte concept puts the Toy back in Toyota [w/videos]

It's been two years since Toyota first revealed its Camatte show car at the Tokyo Toy Show. Though sadly never destined for production, Toyota brought the concept back the following year as the Camatte 57s roadster, and is now returning to the same show with yet another take on the kid-friendly, configurable 1+2 with interchangeable body panels - this time with a slew of features that are fresh not only to the concept itself, but to the industry altogether.
This year the Camatte is being showcased in two forms: a bare chassis in the Tech Lab that lets kids see the inner workings of a modern automobile, and another in the Design Lab that lets kids draw their own motif for the concept that is then displayed on an LED hood.
The overall approach reminds us of the way Toyota's budget brand Daihatsu unveiled the Kopen roadster concept at the Tokyo Motor Show late last year, only even more kid-focused and decidedly more light-hearted than you might otherwise expect from one of the largest industrial giants in the world, and could only have been made for a toy exposition. In Japan. Which would explain the ridiculously upbeat videos below, where you'll also find the brief press release.