1988 Toyota Celica on 2040-cars

Auto blog

Thanks to smaller engines, vehicle dependability falls for first time in 16 years

As automakers have made engines smaller and smaller to improve fuel economy, problems in those vehicles have gotten bigger and bigger. That's the synopsis of a J.D. Power vehicle-dependability study, which found that dependability dropped for the first time in 16 years, largely because the proliferation of four-cylinder engines is causing the vehicles to be less reliable. Specifically, the number of problems per 100 vehicles (or what J.D. Power calls PP100) during the past 12 months for 2011 model-year vehicles rose six percent from the year-earlier figures for 2010 model-year cars. Singling out four-cylinder vehicles revealed about a 10-percent increase in problems during the past year. This issues largely related to engine hesitation, rough transmission shifting and lack of power, signaling the inability of vehicle makers to iron out some of the problems in their smaller engines as they strove for better fuel economy. Six- and five-cylinder engines proved far more reliable. Among car brands, BMW's Mini sub-brand came out as least reliable, with 185 problems per 100 vehicles during the past year. Toyota's Lexus badge was easily the most reliable, with just 68 problems per 100 vehicles. Coming in second place was Mercedes-Benz. The overall average was 133. Check out J.D. Power's press release below. J.D. Power Reports: Increased Engine and Transmission Problems Contribute to Decline in Vehicle Dependability for The First Time in More Than 15 Years General Motors Company Receives Eight Segment Awards, While Toyota Motor Corporation Garners Seven and Honda Motor Company Earns Six WESTLAKE VILLAGE, Calif.: o Owners of 3-year-old vehicles (2011 model year) report more problems than did owners of 3-year-old vehicles last year, according to the J.D. Power 2014 U.S. Vehicle Dependability StudySM (VDS) released today. The study, now in its 25th year, examines problems experienced during the past 12 months by original owners of 2011 model-year vehicles. Overall dependability is determined by the number of problems experienced per 100 vehicles (PP100), with a lower score reflecting higher quality. The study finds that overall vehicle dependability averages 133 PP100, a 6 percent increase in problems from 126 PP100 in 2013. This marks the first time since the 1998 study that the average number of problems has increased. "Until this year, we have seen a continual improvement in vehicle dependability," said David Sargent, vice president of global automotive at J.D.

Toyota C-HR stays sharp from prototype to production

Scion is dead. While the troubled brand was given 13 years to make a case for itself, it never quite succeeded. And that's a shame, because we're pretty confident that this, the production-spec Toyota C-HR would have been one of its biggest hits. Instead, when it arrives in the US, it will be as a Toyota... where it will still likely be a big hit. The new small CUV made its debut after literally years of teasing concepts, the most recent of which was shown late last year in Los Angeles, where it was badged as a Scion. After seeing that car, it's quite clear that Toyota has strained itself to translate its style to the real world. Up front, there's clear inspiration from the Toyota Auris/Scion iM. But aside from the front, the C-HR's biggest inspiration appears to be the Nissan Juke. View 14 Photos It's like Toyota has tried to go even further, though. Its wheel arches are flared even more aggressively and they feed into a strong character line on the lower portion of the doors. In back, Toyota's designers seem to have just rotated the Juke's taillights 180 degrees while they sit below an extremely fast rear window. Said window is integrated into today's latest design trend, a floating roof. Mechanically, the C-HR rides atop Toyota's New Global Architecture, which is Japan's answer to Volkswagen's MQB architecture. Power comes from a hybrid drivetrain, good for a relaxed 120 horsepower. If you don't want hybrid power, Toyota will sell the C-HR with the Euro-market Auris' turbo 1.2-liter engine, but we almost certainly won't see that here in the US. Instead, American drivers will probably be left with nothing but a 2.0-liter, naturally aspirated four-cylinder. That engine will be exclusively paired with a continuously variable transmission that sends power to either the front- or to all four wheels. So there's Juke inspiration, but not in the driving character. Toyota says it will build the C-HR Hybrid in Turkey. We don't know if that facility will handle US-market vehicles or just Europe, but we wouldn't be surprised to see additional facilities come online to produce this stylish little bugger. Related Video: TOYOTA C-HR Toyota's Fresh New Take on the Crossover 2016 Toyota Motorshow Geneva Making its world debut at the 2016 Geneva motor show, the C-HR gives Toyota a powerful new presence in the crossover market.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: