2023 Toyota Camry Se on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

BMW could have a fuel cell vehicle by 2020

The Ultimate Driving Machine may start emitting water vapor, which may not thrill gearheads but could be good for the environment. BMW may have a hydrogen fuel-cell electric vehicle to sell as soon as the end of the decade, UK's Auto Express says, citing people familiar with the process that it didn't identify. And the model will likely be sold within the i sub-brand that includes the i3 electric vehicle and the i8 plug-in hybrid. "We are working on fuel cell development, but we are not able to comment on vehicle plans at this stage or timing at this point," BMW spokesman Dave Buchko wrote in an e-mail to AutoblogGreen on Thursday. Chatter about a potential BMW fuel-cell vehicle has been getting louder in recent months. Late last year, Autocar reported that BMW was mulling using Toyota's fuel-cell system for a version of what would be called the i5 (all the better to quietly cruise the interstate running up and down the West Coast, we guess). BMW and Toyota have been working together on accelerating the development of fuel-cell technology since 2013. Toyota has since made good on the effort of selling fuel-cell vehicles by introducing the Mirai in Japan last year and is preparing to start sales in California later this year. But BMW has been mum, so far. Featured Gallery 2014 BMW i3: First Drive View 33 Photos News Source: Auto Express via Hybrid CarsImage Credit: Copyright 2015 Sebastian Blanco / AOL Green BMW Toyota Hydrogen Cars i5

Honda, Nissan and Mazda recalling 3 million vehicles for airbag inflators

Three million more vehicles can be added to the worldwide tally to be repaired for the faulty airbag inflators supplied by Takata. Honda, Nissan, and Mazda have all issued recalls to replace the bad part, including about 1.2 million of them in North America. NHTSA has been investigating all three companies, plus Chrysler and Toyota, for potentially affected vehicles.
Honda is recalling roughly 1.02 million Civic, CR-V, Odyssey and Element models In North America, built between April 2000 and October 2002. Mazda needs to repair 14,794 units of the RX-8 and Mazda6, and Nissan has 228,000 vehicles in North America to be fixed.
Chrysler is also starting what it calls a "regional field action" to replace the inflators in the 2006 Dodge Charger, according to a company spokesperson. The company says that it has not yet found the problem in any of its vehicles, but it's being done "out of an abundance of caution." The final number of Chargers affected will be announced later this week.