2014 Toyota Camry Xle on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

New autonomous testing ground in Michigan will help battle bad weather

If one of the big weaknesses of autonomous vehicles is their ability to navigate in the snow, consider this a trial by fire. The American Center for Mobility says it has opened its $110 million driverless car testing facility on the site of a former General Motors assembly plant in Michigan, with Toyota and auto supplier Visteon the first to begin testing this week. The ACM proving ground is a 500-acre site at historic Willow Run in Ypsilanti Township, near Ann Arbor. It's one of 10 sites designated by the U.S. Department of Transportation as pilot proving ground sites to test AV technologies. It features a variety of simulated environments to test driverless cars, including a 2.5-mile highway loop, two double overpasses, intersections, roundabouts and a 700-foot curved tunnel. It also opens just as the region experiences a series of snowstorms and the first frigid temperatures of the season. That ability to test autonomous vehicles in a wide variety of weather conditions is important, as autonomous vehicle sensors have struggled to handle cold, wet and snowy conditions. Google parent Alphabet in October said its Waymo division was expanding its winter testing operations to Michigan, making it the sixth state where it's testing its driverless car systems. In a Medium blog post, Waymo CEO John Krafcik wrote that "This type of testing will give us the opportunity to assess the way our sensors perform in wet, cold conditions. And it will also build on the advanced driving skills we've developed over the last eight years by teaching our cars how to handle things like skidding on icy, unplowed roads." Waymo also opened a development center in suburban Detroit in 2016, working with Fiat Chrysler to integrate its autonomous technology into Chrysler Pacifica hybrid minivans. Visteon began testing and validating its DriveCore autonomous driving platform to evaluate algorithms, vehicle-to-vehicle and vehicle-to-infrastructure technology and other systems. Toyota used the facility Wednesday to begin orientation and driver training. ACM has so far secured $110 million to construct the first two phases from founders Ford, Hyundai America Technical Center, Toyota and Visteon, and says it expects to announce more investment soon.

2018 Jeep Grand Cherokee vs. midsize crossovers and SUVs: How they compare on paper

In a world full of SUVs and crossovers all competing for similar buyers in similar segments, there are still some models that find their own little niches that lack such fevered fighting. The Jeep Grand Cherokee is one of those vehicles. It's an oddball in the sense that it's a midsize crossover SUV with a unibody chassis and independent suspension, but it still uses rear-wheel-drive and four-wheel-drive systems and has some off-road capability. It's also a midsize crossover, but only offers two rows of seats. Despite the Grand Cherokee's odd nature, we did come up with a few crossovers and a classic SUV that seem to match the Jeep in size and pricing. We looked at the numbers to compare them on paper. You can find the raw data in the chart below and deeper analysis after that. As always, this is just a comparison of specifications and you'll want to check out our driving impressions of each car if you're getting serious about one or all of these vehicles. And if you want to compare any of these against other vehicles, be sure to check out our comparison tool. Engines and Drivetrains When comparing base engines, the Jeep Grand Cherokee's 295-horsepower is the clear power winner, beating the next most powerful 4Runner by 25. But in torque, the 4Runner takes the laurels with 278 pound-feet, narrowly edging out the Edge's (no pun intended) turbocharged 2.0-liter four-cylinder's 275. That four-cylinder in the Edge will also be picking up another 5 horsepower for 2019, but it still won't win this power contest. Both Ford and Jeep also have another advantage in the fact that you don't have to settle for the base powertrain. Ford has two other engine options, a naturally aspirated V6 and a twin-turbocharged V6, the latter of which outguns the Grand Cherokee's gasoline V6 in both power and torque. That engine will also be bumped up to an impressive 335 horsepower and 385 pound-feet of torque. View 20 Photos The Jeep has the most engine options, though, and it's the only to offer V8 and diesel options. On most Grand Cherokees, the options include a 5.7-liter V8, which is only available with 4WD. It makes 360 horsepower and 390 pound-feet of torque, outperforming even the 2019 Edge's twin-turbo V6. The diesel engine doesn't make much power with just 240, but it makes up for it with torque at 420 pound-feet. And of course there are the SRT and SRT Trackhawk models with even bigger and supercharged V8 engines respectively.