2007 Toyota Camry Le Sedan 4-door 2.4l on 2040-cars

Auto blog

2014 Toyota Aygo marks the spot [w/video]

Following the leaked pictures we showed you yesterday, we have the full battery of images and info of the all-new Toyota Aygo, in addition to our gallery of live photos from the floor of the Geneva Motor Show.
Like its cousins from Peugeot and Citroën, the Aygo foregoes a diesel engine in favor of a highly efficient gas powerplant. The 1.0-liter naturally aspirated 4-cylinder turns out 68 horsepower and 70 pound-feet of torque. When it hits the market, it'll be with either a five-speed manual transmission or a five-speed, X-Shift automated manual. The former will help the Aygo return 57.3 miles per gallon and hit 62 miles per hour in 14.2 seconds. Opting for the X-Shift variant will net drivers 56 mpg, with 62 arriving in a leisurely 15.5 seconds.
We'll admit, aside from the fuel efficiency, there's nothing terribly great about those numbers. Still, with its compact dimensions - it's only 136 inches long - and a curb weight of no more than 2,000 pounds, it should prove tossable in the bends.

Toyota Recalling 1.67 Million Vehicles Worldwide

UPDATE: Toyota is now announcing specifically which models are covered under its fuel pipe recall in the US. The company is repairing about 423,000 Lexus models that include the 2007-2010 LS, 2006-2011 GS, 2006-2011 IS, 2010 IS C and 2008-2010 IS-F. The automaker says that it isn't aware of any fires, crashes, injuries or fatalities caused by this problem. According to Toyota, the recall is because it's possible for the fuel delivery pipes and the fuel pressure sensor to form a bad seal with the gasket between them because of a protective coating protecting against corrosion on the pipes. It's possible for this to eventually cause a fuel leak, and obviously in a hot engine bay that's a potential fire risk. To fix the problem, dealers will replace the gasket and repair the gasket seating surface between the fuel delivery pipe and the fuel pressure sensor. The company will begin notifying owners soon. You can find the official press release, below. Toyota is issuing three separate recalls covering 1.67 million vehicles worldwide with most of those models in Japan. It looks like the campaigns' impact on the US may be smaller, though. According to Reuters, Toyota isn't aware of any accidents, injuries or fatalities affecting the models. Some yet-unnamed Lexus models might also be affected. The largest of the campaigns does not currently affect any US-market vehicles. About 802,000 units of the Toyota Crown Majesta, Crown, Noah and Voxy in Japan are being repaired to replace a seal that could leak in the brake master cylinder. Those already leaking get a new brake booster, as well, according to Reuters. The only recall currently believed to affect the US is due to a problem covering approximately 759,000 vehicles with 423,000 of them here. The repair is to fix a faulty fuel delivery pipe that could cause a fire if the fuel leaks out. Unfortunately, we don't know which models it covers. Autoblog spoke to Toyota spokesperson Mona Richard and was told the information was still "under embargo." When exactly that embargo will lift isn't yet known, but we're on the case. Finally, Toyota is recalling 190,000 Corolla Rumion and Auris models in Japan for a faulty evaporative emission control unit. Autoblog is in contact with Toyota, and we'll update this story as soon as we know more about its affect on the US market.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.