1997 Toyota Camry Le Sedan 4-door 2.2l on 2040-cars

Auto blog

Toyota says C-HR Concept is more of a Prius preview than we thought

When the designers thought they were just about finished with the new look of the fourth-generation Toyota Prius hybrid, higher-ups did not like what they saw and sent those designers back to the proverbial drawing board to come up with something a little spicier. Duly inspired, the designers came up with something last spring that may look a bit like the C-HR crossover concept, Automotive News says. For those looking for a Prius design with a little more bite, that isn't necessarily a bad thing. The C-HR hybrid concept isn't a direct preview of the new Prius, but the "diamond architecture" features like thick wheel wells and mean-looking grille could make an appearance on the hybrid. Those aren't exactly familiar Prius materials, but they may be coming to the next version of the world's most popular hybrid, whose production debut has been pushed back until the end of next year. It is also notable that there will likely be a far greater design difference between the standard Prius hatchback and the plug-in hybrid variant, which are pretty much identical in their current versions. The C-HR concept, whose look has been compared to that of the Nissan Juke, was unveiled at the Paris Motor Show last fall. We think it looks good, and wouldn't mind seeing some of the touches in the new hybrid.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota, Suzuki partner on hybrids, EVs, building cars for each other

NAGOYA, Japan — Toyota and Suzuki on Wednesday said they planned to produce electric vehicles and compact cars for each other to better compete with fast-changing technologies in the global auto industry. The agreement follows an initial R&D tie-up announced by Japan's No. 1 and No. 4 automakers in 2017, and will see more vehicles produced by Suzuki for Toyota, one of the world's biggest carmakers. Although Suzuki is far smaller, it is a dominant force in the fast-growing Indian market. The two automakers have been pooling their strengths. Toyota is a leader in hybrid technology and is investing heavily in automated driving, while Suzuki specializes in affordable compact cars — as many automakers struggle to keep pace with ballooning investment in EVs and self-driving cars. Under the latest agreement, Suzuki will source gasoline hybrid systems for cars it sells worldwide from Toyota, which pioneered hybrid vehicles with the Prius more than 20 years ago, the companies said in a joint statement. In return, Suzuki will produce two compact models for Toyota in India based on its Ciaz and Ertiga models. Further cooperation with Suzuki will help Toyota expand its presence in India, the world's fifth-largest passenger car market where it has struggled to grow sales due to lean demand for its lower-cost models. The deepening partnership between the two automakers will enable cost-conscious Suzuki to tap into Toyota's R&D firepower to develop lower-emission vehicles and self-driving cars — areas which Suzuki has admitted it is struggling to keep up. "We believe that the expansion of our business partnership with Suzuki ... will help give us the competitive edge we will need to survive this once-in-a-century period of profound transformation," Toyota President Akio Toyoda said in a statement. The two automakers will deepen their cooperation in India, where Suzuki's hybrid vehicles will be made using engines and batteries locally produced by Toyota. They will also join forces in Europe, where Toyota will produce electric vehicles based on its RAV4 SUV crossover and Corolla wagon for Suzuki, while Suzuki will supply Toyota with gasoline engines for compact vehicle models sold in the region. Suzuki will also produce its Baleno, Vitara Brezza, Ciaz, and Ertiga models for Toyota which will be rebranded and renamed as Toyota models for the African market.