2006 Toyota 4runner Sr5 4wd on 2040-cars

Auto blog

Recharge Wrap-up: Japan's new hydrogen rules could help Toyota, New Delhi pollution worse than thought

The European Union is funding Fastned EV fast-charging corridors in Germany. The EU has set aside 2 million euros as part of its Trans-European Transport Networks program for Fastned to build the charging stations along major highways in Germany. The EU plans to help fund a network of 155 fast-charging stations along popular routes in Germany, Sweden, Denmark and Holland. Of those, Fastned will build 94 stations in Germany and Holland. Read more in the press release below. Revised hydrogen rules in Japan will make it easier to create hydrogen fueling infrastructure. Japan's Ministry of Economy, Trade and Industry has created guidelines allowing for liquefied hydrogen at filling stations, exceptions to required distances between precooling equipment and public facilities and less expensive materials for hydrogen storage. Toyota stands to gain from the new standards, as making fueling more readily available makes it easier to sell customers on the Mirai fuel cell vehicle. The result could be fiercer competition between Toyota and Tesla in Japan. Read more in the press release below, and at Tech In Asia. New research finds that New Delhi roads suffer from much worse pollution than the average levels recorded throughout the city. Pollution along roads is up to eight times higher than the numbers shown by urban background pollution monitors. With half of the city's population living within 300 meters of a major road, it's a major health concern. Joshua Apte of the University of Texas, Austin, recorded various pollution levels from inside vehicles in hopes of showing the difference between ground-level pollution and the lower numbers at monitoring sites. In the process, Apte found himself developing bronchitis on a quarter of his visits to the city. Read more at the Columbus Telegram. Featured Gallery 2016 Toyota Mirai View 15 Photos Related Gallery Fastned Fast Charging in Germany News Source: Fastned, Japan Ministry of Economy, Trade and Industry, Tech In Asia, Columbus TelegramImage Credit: Toyota Green Tesla Toyota Electric Hydrogen Cars recharge wrapup

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

PickupTrucks.com's latest test results in a familiar winner [w/video]

PickupTrucks.com has gone and thrown the latest batch of half-ton pickups into a cage match to see who would come out on top. The site put the 2014 Chevrolet Silverado 1500, GMC Sierra 1500, 2013 Ford F-150, Ram 1500, Toyota Tundra and Nissan Titan through a battery of tests. Those included 0-60 miles per hour acceleration, 60-0 mph deceleration, fuel economy, a hill climb, and payload and towing. They even threw the rigs on an autocross course to evaluate overall handling. Each truck was given points based on how it scored in each evaluation.
Who came out on top? Somewhat surprisingly, the 2013 Ford F-150 walked away with the gold, though fewer than 50 points separated first and fourth place. Head over to PickupTrucks.com to read the full evaluation and the final results. You may be shocked to see exactly where some of the segment's newest additions placed. You can also watch a video on the test below.