1991 Toyota 4runner Sr5 Sport Utility 4-door 3.0l on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota launches new Pixis Epoch kei car in Japan

Kei cars may be small in size, but they're big business in Japan. The latest arrival to the category is the little hatch you see above, the Toyota Pixis Epoch.
It's the fourth vehicle produced by the Daihatsu division but sold under the Toyota brand. As with other keis, power comes from a 660cc engine. It's mated to a continuously variable transmission driving either just the front wheels or all four. In both configurations, the Pixis Epoch features a stop-start system that helps its emissions and fuel efficiency figures come in well below even the Japanese government's stringent standards.
The whole package measures just 3,395 mm (133 inches) long, 1,475 mm (58 inches) wide and 1,500 mm (59 inches) tall, but offers a relatively spacious and utile interior, plus a tight turning radius of just 4.4 meters. Pricing ranges from 795,000 to 1.2 million yen - that's less than $10,000 (and no more than $15k). Further details in the press release after the jump.

Toyota reaffirms commitment to body-on-frame SUVs

Toyota sold 121,055 Highlander CUVs in 2012, according to Automotive News. By comparison, it sold 78,457 examples of four different body-on-frame, truck-based SUVs (4Runner, FJ Cruiser, Sequoia and Land Cruiser). One could argue then, that the traditional SUVs aren't pulling their weight from a sales perspective. Yet that isn't stopping Toyota from reaffirming its commitment to a segment that has seen its former champions - Ford, General Motors and Chrysler - abandon it with alarming speed. Ford and GM still offer body-on frame utilities, but only in the very largest offerings, catering to seven or even eight passengers. Everything outside of the Expedition or Tahoe rides now on a unibody.
Toyota's decision to stick with the technology is good news if you're in the market for smaller SUVs that are still capable of heading well off the beaten path. Outside of the Jeep Wrangler, Grand Cherokee (a unibody) and perhaps Nissan Xterra, there's not much in terms of capable SUVs between $20,000 and $50,000. As the Toyota brand's US head, Bill Fay, says, "Clearly, the trend has shifted, but there is still an owner base that is interested in these vehicles."
We don't doubt Fay on that, but it may also be somewhat telling that Toyota's SUV lineup is aging, and we haven't seen or heard much about replacement models in the pipeline. Admittedly, the 4Runner (pictured) has been facelifted for 2014, but it's mostly cosmetic in nature. Despite Toyota's posturing, we still expect its body-on-frame lineup to thin in the coming years as sales dwindle and escalating fuel-economy standards make business cases even tougher. Here's hoping that Toyota manages to keep at least one rough-and-tumble SUV in its lineup in the coming years.